Enerdrive Pro Series 60A AC, 45A TS, 40A DCDC + 300Ah 12V Slimline Lithium Battery

K-PRO-1-B-EP-300-SLIM

$9,599

Save $1,472 (13%) off RRP of $11,071

FREE SHIPPING

Learn More»
This product is built to order. Build time 4 weeks. Express Shipping Price Match Guarantee Customer Reviews

Product Description

Enerdrive Pro Series 60A Off-Grid 300Ah Lithium Battery Kit, 5 Year Warranty. For the ultimate in RV energy and support you can’t go past an Enerdrive Pro Series power system. These systems are typically requested by those who wish to travel for extended periods of time and still wish to run many of the creature comforts we are accustomed to at home.

Enerdrive Pro Series Lithium owners enjoy the benefits of running their air conditioning systems, microwave, toaster, kettle, induction cook tops, as well as more traditional loads in a typical caravan such as lights, water pump, TV etc.

Enerdrive Pro Series System are easier than ever before to install.  The majority of the components are pre assemble and ready to go.  This makes for a fairly simple installation process. All you need to do is select which battery and battery monitor you prefer!

Speak to one of our friendly product experts for support in ensuring this is the best system for your needs. We are confident Enerdrive have a system capable of meeting your needs.

K-PRO-1-B System Includes:

  • ePOWER 12V 40A DC to DC Battery Charger to charge from the vehicle and portable solar    EN3DC40+
  • Enerdrive ePOWER 12V 60A Battery Charger to charge your battery from a generator or mains power    EN31260
  • Morningstar Tristar 45A Solar Controller to ensure the highest available energy from rooftop solar panels    SR-TS-45
  • Lithium BMS Monitoring & Control System with Active Balancing for maximum battery protection and lifespan
  • Main DC Isolation Switch
  • Load Control Relay
  • Charge & Load Circuit Protection Plus Main Fusing
  • 300Ah 12V Compact or Slimline Lithium Battery (not mounted to board)    EPL-300AH-12V-COMP-A or EPL-300AH-12V-SLIM-A
  • ePro PLUS battery Monitor – Displays the battery % capacity and current flow for peace of mind (ePRO Plus Model Only)
  • Simarine PICO Monitoring Screen for battery % capacity/loads/tanks/temperatures (Simarine Model Only)
  • Suitable for 4 separate monitorable loads and up to 4 tank sender inputs with an additional temp sensor input (Simarine Model Only)

 

Important Information:

Installation:

When the installation is complete you are required to complete the commission procedure in order to ensure the system is fitted correctly and the Enerdrive fail safes built in to the system are functional. 

Enerdrive request that when your installation is complete you reach out to their team for a quick consultation and send images of the final installation to them for filing.  Their intention is to be as best prepared as possible to offer system support for the life of the system.   

Please CLICK HERE for more important information around the installation of these pro series power systems.

Accessories: Cabling to connect the battery to the board is supplied. If connecting an inverter, you will need to purchase an appropriately sized cable from the accessories list. 

PRO TIP: Common accessories to go with this board are; one or two AGM Board Cable Kits. Thickness, length & quantity will depend on installation type. Please check products cable description for details.

Enerdrive Product Manual

 

Enerdrive Pro Series Lithium Batteries:

Lithium Ion batteries have a high energy density and are perfect for cyclic applications. They offer savings of up to 70% in volume and weight compared to traditional lead-acid batteries. Lithium Ion batteries offer ultra-fast charging and discharging, high efficiency and three times as many charging cycles (>1500 full cycles) compared to traditional lead acid batteries.

Enerdrive’s Pro Series Lithium-iron-phosphate (LiFePO4) is the safest of the mainstream li-ion battery types. The nominal voltage of each cell is 3,2V. A 12,8V Enerdrive battery therefore consists of 4 cells connected in series.

All lithium Ion batteries require a battery management system (BMS). There is no way around this. There are numerous examples of catastrophic failures where no BMS has been used.

The Enerdrive Pro Series Lithium battery packs incorporate Active Cell Balancing across the range. The balancing method used is Dynamic Energy Transfer. This allows for automatic balancing of the cells during charging, discharging and storage. Any cells with high voltage density will transfer energy to the lower cells in the pack. This method of cell balancing utilises the energy within the battery pack to balance the cells unlike passive balancing systems which bleed this excess energy off as heat to keep the battery balanced at the top end of the charging cycle, wasting energy already stored within the battery.

The Enerdrive Active Balancing System also incorporates individual cell “Hi -Voltage & Low-Voltage” disconnect feature to interface with the Enerdrive Advanced BMS Driver, switching (off/on) of charging sources & consumer loads. Running Active Cell Balancing allows Enerdrive to parallel and series connect multiple batteries within the system. This offers 12v, 24v, 36v &,48v systems with up to the possibility of 1500Ah+ capacity.

The installation kit incorporates the Enerdrive Advanced BMS Rely Driver, ePRO or Simarine monitor, Main DC Fuse and a load disconnect latching relay. This kit is connected to the battery and designed to work hand in hand with the batteries Active Balancing System for controlling charging and discharging sources for ultimate protection of your investment.

Many companies will just sell you the battery and if lucky, you will get a BMS incorporated. They neglect to tell you that disconnecting loads and charging sources at the critical times requires more equipment to be installed to manage these operations.

 

Enerdrive ePOWER 12V 40A DC to DC Battery Charger:

Enerdrive ePOWER 12V 40A DC to DC Battery Charger designed to meet the rugged demands of Australian conditions and delivering multiple source charging for DC systems.

The Enerdrive ePOWER DC2DC Battery Charger is a fully automatic multistage, multi input battery charger with the ability to charge from either an alternator linked to a battery; or via solar power with the in built Maximum Power Point Tracking (MPPT) Solar Controller.

12V 40A DC2DC Battery Charger Features:

  • Two totally independent DC Inputs for both engine and solar regulation charging one house battery bank output
  • DC M6 screw terminals that will allow for large battery cable connection between all sources
  • A dedicated Maximum Power Point (MPPT) solar regulator
  • The same battery algorithms as included in our AC mains ePOWER battery charger including a specific lithium charging profile
  • 40A output up to 40+°C with thermo controlled fan cooling
  • Fully programmable LCD display to show which source is charging the battery along with charger status, voltage and amperage
  • Temperature sensor included in charger for more accurate battery charging

Enerdrive Product Brochure

Enerdrive Product Manual

 

Enerdrive ePOWER 60A Battery Charger:

The Enerdrive ePOWER 60A Battery Charger is a fully automatic, “set and forget” charger. It is designed to quickly and accurately recharge your batteries using algorithms that help maximise service life. Multistage smart charging technology enables the charger to be connected to your battery banks permanently.

As dictated by battery manufacturer’s recommendations, batteries require a multistage charge sequence for perfect, fast and accurate charging.

The Enerdrive ePOWER charger can be programmed for Lithium batteries. This setting delivers the full rated output of the charger constantly with the charger switching to power supply mode once the voltage peak is met (indicating a full battery bank).

60A Battery Charger Features:

  • Multistage Charging: Fully automatic multistage battery charger with the ability to charge 3 separate battery banks.
  • Separate Battery Banks: Isolated charging design where battery bank one is separate from battery bank two and three.
  • Programmable: Battery bank 1 can be programmed with a different charge algorithm over banks 2 and 3.
  • Current Control: User adjustable current output (e.g. Dial the 60amp unit back to run off a 1kVA generator).
  • Smart Charging: The ePOWER 60A battery charger will regulate its output based on the loads connected to your battery banks.
  • Wide AC Input Range: Operates on both 110V / 60Hz and 240V / 50Hz.
  • LED Display: Easy to use “set and select” menu along with scrolling charger status.
  • Silent Mode: Disables the cooling fan for total silent operation at night or whenever required. Activation reduces charge output by half and locks out fan for 12 hours.
  • Temperature Sensor: Battery temperature sensor included with 3 meter cable.
  • 5 Year Warranty from an Australian company renowned for customer support.

Enerdrive Product Brochure

Enerdrive Product Manual

Enerdrive Operating Guide

 

Morningstar TriStar 45 Amp Solar Controller:

The Morningstar TriStar is a three-function controller that provides reliable solar battery charging, load control or diversion regulation.

  • Highest Reliability – Large heat sink and conservative design enables operating at full ratings to 45°C.
  • More Information – Optional meter displays extensive system and controller information, automatic self-test and reset. Displays in 5 languages.
  • Communications Capability – RS-232 connects to a personal computer for custom settings, data logging and remote monitoring and control.
  • Fully Adjustable – DIP switch provides user with choice of 7 digital presets. Additional custom settings via RS-232.
  • Extensive Electronic Protections – Fully protected against reverse polarity, short circuit, over current, high temperature and over voltage.

Product Manual

 

Enerdrive ePRO PLUS Battery Monitor:

  • Complete battery status information at a glance (%, V, A, Ah, W, h:m, °C)
  • Supports up to three battery banks (12V, 24V and 48V)
  • Very simple ‘Plug and Play’ installation
  • Perfect integration with Enerdrive DC Modular products

The ePRO PLUS is the latest generation, highly advanced battery monitor. It consists of an intelligent shunt and a remote control display unit. The shunt has a Grid Optimized footprint for perfect integration with our DC Modular products.

This advanced battery monitor not only shows the true state of charge of your battery system. It also offers a large amount of additional features to optimally supervise your battery system and control external equipment. The ePRO PLUS is compatible with lead based and Lithium batteries (LiFePO4).

The ePRO PLUS can monitor up to three battery banks. The inputs for battery bank 2 and 3 can also be configured for other purposes, like mid-point voltage measurement, keyswitch input, setup lock or backlight control. The ePRO PLUS battery monitor can measure DC currents up to 600Amps (500Amp continuous) and voltages up to 70Vdc. So any lead- or lithium based battery from 12V up to 48V can be monitored.

The installation time is minimal, requiring only one supply wire to the intelligent shunt base and a single ‘QuickLink’ cable between the shunt base and the control/display unit (CDU). Additionally, the battery minus cable must be interrupted in order to insert the shunt into the high current circuit. The fused supply wire and the QuickLink cable are both included in the package, avoiding the need for a separate connection kit.

Enerdrive EN55050 EPRO Plus Product Brochure

Enerdrive EN55050 EPRO Plus Product Manual
Enerdrive Installation Guide

 

Simarine Pico+ Black Flush Mount Battery Monitor:

Simarine PICO sets new standards for marine battery and tank monitors in fields of design, functionality, connectivity and ease of use.
 
PICO’s display unit is made of a sleek anodized aluminum casing and a thick Gorilla®️ Glass with Anti-Reflective coating protecting the optically bonded high-contrast 3.5 inch IPS LCD display. It’s water and dust proof and can be mounted both indoors and outdoors. The screen brightness is automatically adjusted with a light sensor. The device is operated by four water tolerant CapSense®️ touch buttons.
 
The Pico system provides you with a simple overview of all important details regarding your battery (voltage, current, amp hours, battery capacity in%, battery temperature) and also tank level and temperature indications.
 
Its expandable architecture allows adding up to 20 x Simarine shunts and modules to monitor up to 6 x battery banks, 14 x tanks, 10 temperatures, 20 x independent consumer and generators and 1 x Inclinometer sensor with pitch and roll readings. The barograph gives precise air-pressure readings, trends, and history.

Specifications

SKU K-PRO-1-B-300

Brand Enerdrive

Warranty Period: 5 Years

Product Category Power Systems

Nominal Voltage 12.8V (Compact & Slim Battery)

Nominal Capacity 300Ah (Compact & Slim Battery)

Cycle Life (DOD – 80% under controlled conditions) ≥ 1500 Cycles (Compact & Slim Battery)

Battery Charge Temperature 0°C-+45°C (Compact & Slim Battery)

Standby (Float) Voltage 13.50V (Compact & Slim Battery)

Battery Discharge Temperature -20°C-+60°C (Compact & Slim Battery)

Battery Output Voltage Range 2.0V – 4.2V (Compact & Slim Battery)

Standby Current < 2 mA (AC Battery Charger) | 0.3C,90A (Compact & Slim Battery)

LCD Display Charging status, Battery Voltage, Output Current & Fault Codes. (AC Battery Charger)

Max Constant Current 1C,300A (Compact & Slim Battery)

Dimensions (LxWxH mm) 412 x 219 x 343 mm (Compact Battery) | 824 x 111 x 342 mm (Slim Battery)

DC Output Connection Heavy Duty Terminal (3 banks) – Pan Heads 6mm Thread (AC Battery Charger)

Voltage 12V (Compact & Slim Battery)

Output Short Circuit Yes, (with user replaceable fuse/s) (AC Battery Charger)

Power Factor Correction Yes (AC Battery Charger)

Selectable Battery Type Gel, AGM, Flooded, Lithium, Program (DC & AC Battery Charger)

Storage Range (temp) -40° to 70° C (AC Battery Charger)

Power consumption (DC 12V) 1050W (Full Load) (AC Battery Charger) | <50mW (<0.004A) (Compact & Slim Battery)

Ingress Protection IP32 (Basic drip proof in vertical orientation) (AC Battery Charger)

Float 13.0V - 13.8V (DC Battery Charger) | 13.4 – 13.8 V (AC Battery Charger)

Net Weight (kg) 55

AC Input Voltage 90 to 265 VAC (AC Battery Charger)

Maximum Charging Voltage 14.20V (Compact & Slim Battery)

Humidity 5-95%, relative humidity non-condensing (AC Battery Charger)

AC Input Connection IEC with Supplied 1.2M Power Lead (AC Battery Charger)

Over Charge Yes, unit shutdown (AC Battery Charger)

AC Input Frequency Range 47 – 63 Hz (AC Battery Charger)

Equalize 15.5V (DC Battery Charger) | 16.0 V (AC Battery Charger)

Charger Efficiency >82% (AC Battery Charger)

AC Input Operating Range 207-265 Vac (5.9 A Max)90-125 Vac (11.3 A Max) (AC Battery Charger)

Charging Control Three Stages (DC Battery Charger) | Four stages (Bulk/Absorption/Float/Maintenance) Two stages (Bulk/Absorption), Constant Power Supply (Program sett

Output System Voltage 12V

Standard Current 0.3C,90A (Compact & Slim Battery)

Output Current Rating 40Ah (DC Battery Charger) | 60Ah (AC Battery Charger)

Operating Range (temp) -20° to 60° C (AC Battery Charger)

DC Output Ground Single Heavy Duty Common Ground Stud (AC Battery Charger)

DC Output Single (DC Battery Charger) | Three (1 fully independent, 2 common with diode isolation) (AC Battery Charger)

Battery Temp Sensor Port RJ12 (standard battery temp. sensor supplied) (AC Battery Charger)

Reverse Polarity Yes, (with user replaceable fuse/s) (AC Battery Charger)

Over Temperature Protection Yes, unit de-rated and shutdown (AC Battery Charger)

Temperature Setting Low/ Normal/ High (Battery Temperature Sensor Standard) (DC Battery Charger) | Hot, Normal, Cold (no sensor connected) (AC Battery Charger)

Charger Mode Output Voltage 13.8V - 15.5V (DC Battery Charger) | 14.2 – 15.5 V (AC Battery Charger)

Cooling Forced air ventilation (thermo controlled fan) (AC Battery Charger)

Efficiency 95% (DC Battery Charger)


Videos

Pro Series to B-TEC - The Next Step for Enerdrive

 

"OFF GRID POWER" IN A CARAVAN - WE EXPLAIN IT!! How?? Why?? How much?? & YOU CAN WIN A FRIDGE!!!

 

Enerdrive eTIPS - How to Reprogram a Simarine Display

 

Product Q&A

Ask Us a Question
  • What does max constant current (1c,300A) mean?

    If a battery is rated at "1C", it means it can be discharged at its full amperage capacity for one hour, in this case the EPL-300AH-12V battery can provide 300A of DC current for 1 hour.

    A common application would be powering a 3000w inverter at full power for one hour.


  • What if I see red LED's on the “TOR & Outputs” of the Advanced Relay Driver?

    If a battery cell goes Hi Voltage and cuts the Hi Voltage loop wire then the Advanced BMS Relay Status LED will flash RED and the Driver will activate the TOR & Output contacts (turning red) and will drive the installed relay/contacts to cut out all charging sources (solar/vehicle/main charger) for 10 minutes. If the cell voltage has not come back within range before 10min, it will stay active for another 10 minutes and repeat until the cell/s are within range.

  • What if the battery monitor reads 24% or less or the battery voltage has reached 12.4V or less, and the power has gone out?

    The battery has reached its maximum discharge and the main battery relay has dis-engaged to protect the battery. Turn off all loads and turn on the charging sources. Once the percentage on the ePRO Plus Meter reaches 28%, you can push the yellow button on the main battery relay until it latches down to re-engage the main battery switch and monitor your loads. Keep charging sources connected until the battery reaches maximum charge 100%.

  • What if the Status light is flashing Blue and the temperature is above 0°C?

    The Temperature Sensor has failed or become unplugged and the system has shut down the charge sources. Check to make sure the sensor is plugged in correctly. If so, remove the Temperature Sensor from the Advanced BMS Relay Driver and select Program B on the side of the Advanced BMS Relay Driver.

  • What if the main battery switch has tripped out, but the LED's on Inputs 1-3 on the Advanced BMS Relay Driver are Green and the battery monitor is 26% or higher in capacity?

    This has happened because the system has registered 1 of 2 faults:

    1: A high temperature condition has occurred above 55°C (status LED flashing Red/Blue) and shut down the main battery relay to protect the system from an extreme high temperature situation. Once the temperature reduces below 55°C the main battery relay will automatically switch itself back on.

    2: The system has registered a low battery SOC ≤24% or low cell voltage ≤ 3.1V condition (Status LED flashing Green) and shut down the main battery relay to protect the battery from over discharge. If solar is connected to the system, once the SOC rises above 26% and the cell voltage increases above 3.1V then inputs 1-3 will register a Green LED. At this point, push the yellow button on the main battery relay until it latches down to re-engage the main battery switch and monitor your loads. Switch on additional charging sources until the battery reaches maximum charge 100%

Warranty

For details relating to this product's warranty CLICK HERE

Delivery

    For details relating to our delivery process CLICK HERE

Best Sellers From This Category: