Enerdrive eSYSTEM-C 40A AC / DC, ePRO+ & 2000W Inverter (RCD/AC Transfer)

SKU: eSYSTEM-C Learn More»

eSYS-C

$3,760
$4,415
In StockThis product is built to order. Build time 4 weeks.

EXTRA $75 OFF! Add to cart to get an instant discount
SALE ENDS:

FREE SHIPPING

This item is sent via Express Courier. All freight is fully insured.

Accessories List:

$199

$265

$249

$328

$250

$235

$215

Click '+' to show more accessories
Learn More»

Description

Enerdrive eSYSTEM-C 40A AC / DC with ePRO+ & 2000W Inverter (RCD/AC Transfer), 5 Year Warranty. Introducing Enerdrive's Installation Kits for 4WD Canopies, Caravans, Camper Trailers, Commercial Work Vehicles and more.

Enerdrive have created many different layouts and dimensional sizes to fit nearly every possible application. From small kits with AC & DC charging and battery monitoring up to kits with 2000w inverters and individual charge/load monitoring.

These kits are all pre-wired by Enerdrive where possible to keep the kits simple to install. All boards have a full wiring diagram showing each circuit and where to connect your loads, battery and inverter cabling. All items are mounted on a 12mm Black plastic (water & rot resistant) board for simple mounting into the application.

Includes:

  • Enerdrive eSYSTEM-C 40A AC / DC, ePRO+ & 2000W Inverter (RCD/AC Transfer)

Battery Options:

 

Product Drawing

 

PROPERTIES

ESYS-C

ESYS-D

ESYS-E

ESYS-F

ESYS-G

ESYS-H

ESYS-I

ESYS-J

ESYS-K

ESYS-L

ESYS-M

ESYS-O

ePOWER AC 40Amp 230v Charger

 

 

 

 

ePOWER AC 60Amp 230v Charger

 

 

 

 

 

 

 

 

 

ePOWER DC2DC 40+ Charger (Vehicle/Solar)

Morningstar Tristar PWM-45A Solar Controller

 

 

 

 

 

 

Enerdrive Epower MPPT 40A Solar Controller

 

 

 

 

 

 

 

 

 

 

 

✓✓

ePRO Plus 500A Battery Monitor with Remote Display

 

 

 

 

 

 

Simarine Pico LCD WIFI Monitoring Screen

 

 

 

 

 

 

Simarine SC303 300A Main Battery Shunt

 

 

 

 

 

 

Simarine SCQ25T Individual Load/Charge Module

 

 

 

 

 

 

 

 

Simarine SCQ50 Individual Load/Charge Module

 

 

 

 

 

 

 

 

 

 

Inverter Breaker 200A (Pre Wired Inverter Supply

 

 

 

 

 

 

 

 

#

Battery Restart Switch (Lithium Batteries)

 

 

 

 

 

24hr Critical Load Distribution Fuse Block

 

 

 

 

Main Load Distribution Fuse Block

 

 

 

 

 

 

 

 

ePOWER 2000W AC Transfer Inverter

 

 

 

 

 

 

 

 

 

 

Dimensions

1185W x 380H x 130Dmm

600W x 490H x 100Dmm

600W x 490H x 100Dmm

1185W x 380H x 130Dmm

790W x 380H x 100Dmm

1195W x 380H x 111Dmm

1195W x 380H x 111Dmm

920W x 380H x 111Dmm

490W x 600 H x 111D mm

490W x 600 H x 111D mm

600W x 350H x 111D mm

600H x 520W x 111Dmm

Show More

Specifications

SKU eSYSTEM-C

Brand Enerdrive

Product Category Power Systems

Model EN3DC40+ (DC Battery Charger)

Model EN31240 (AC Battery Charger)

Model EN55050 (Battery Monitor)

Model EN1120S-X (Inverter)

Wattage (W) 2000

Ingress Protection IP32 (Basic drip proof in vertical orientation) (AC Battery Charger)

Float 13.0V - 13.8V (DC Battery Charger)

Float 13.4 - 13.8 V (AC Battery Charger)

Operating Range (temp) -20° to 60° C (AC Battery Charger)

Operating Range (temp) 0°C to 40°C (Inverter)

Regulatory Compliance Complies with AS/NZS 60335.2.29 Including Australian deviations.

Humidity 5-95%, relative humidity non-condensing (AC to DC Battery Charger)

Humidity 5-90% noncondensing (Inverter)

AC Input Connection IEC with Supplied 1.2M Power Lead (AC Battery Charger)

DC Output Single (DC Battery Charger)

DC Output Three (1 fully independent, 2 common with diode isolation) (AC Battery Charger)

Over Charge Yes, unit shutdown (AC Battery Charger)

AC Input Frequency Range 47 - 63 Hz (AC Battery Charger)

Temperature Setting Low/ Normal/ High (Battery Temperature Sensor Standard) (DC Battery Charger)

Temperature Setting Hot, Normal, Cold (no sensor connected) (AC Battery Charger)

Charger Mode Output Voltage 13.8V - 15.5V (DC Battery Charger)

Charger Mode Output Voltage 14.2 - 15.5 V (AC Battery Charger)

Under Voltage Shutdown 10.5 / 11.8 VDC (Inverter)

Storage Range (temp) -40° to 70° C (AC Battery Charger)

Power consumption (DC 12V) 700W (Full Load) (AC Battery Charger)

Charging Control Four stages (Bulk/Absorption/Float/Maintenance), Two stages (Bulk/Absorption)Constant Power Supply (Program setting), Priority Battery Bank Charging

LCD Display Charging status, Battery Voltage, Output Current & Fault Codes (AC Battery Charger)

Input Voltage 12.5 VDC (Inverter)

DC Output Ground Single Heavy Duty Common Ground Stud (AC Battery Charger)

Battery Temp Sensor Port RJ12 (standard battery temp. sensor supplied) (AC Battery Charger)

Reverse Polarity Yes, (with user replaceable fuse/s) (AC Battery Charger)

Over Temperature Protection Yes, unit de-rated and shutdown (AC Battery Charger)

Selectable Battery Type Gel, AGM, Flooded, Lithium, Program (DC and AC Battery Charger)

Over Voltage Shutdown 15.5 VDC (Inverter)

USB Socket Output 5V, 750 mA (Inverter)

Charger Efficiency 95% (DC Battery Charger)

Charger Efficiency > 82% (AC Battery Charger)

AC Input Operating Range 207-265 Vac (3.8 A Max) 90 - 125 Vac (7.7 A Max) (AC Battery Charger)

Standby Current < 2 mA (AC Battery Charger)

AC Input Voltage 90 to 265 VAC (AC Battery Charger)

Net Weight (kg) 23

DC Output Connection Heavy Duty Terminal (3 banks) - Pan Heads 6mm Thread (AC Battery Charger)

Dimensions 1185 x 380 x 130 mm (L x W x D)

Output Short Circuit Yes, (with user replaceable fuse/s) (AC Battery Charger)

Power Factor Correction Yes (AC Battery Charger)

Under Voltage Alarm Recovery 11.3 / 12.3 VDC (Inverter)

Equalize 15.5V (DC Battery Charger)

Equalize 16.0 V (AC Battery Charger)

Under Voltage Shutdown Recovery 12.0 / 12.6 VDC (Inverter)

Under Voltage Alarm 11.0 / 12.1 VDC (Inverter)

Cooling Forced air ventilation (thermo controlled fan) (AC Battery Charger)


NOTE: see full product specifications & further product info in the section on this page.

Q & A


  • can the board be set up in opposite direction by that i mean inverter on left hand side

    Hi Michael,

    Unforutnately Enerdrive only produce them in the one layout sorry.

Reviews

Be The First To Review This Product!

Help other My Generator users shop smarter by writing reviews for products you have purchased.

Write a product review

Warranty

Warranty Period: 5 Years

For details relating to this product's warranty CLICK HERE

Delivery

    For details relating to our delivery process CLICK HERE

Enerdrive B-TEC 200Ah Lithium Battery Only

Enerdrive B-TEC 200Ah Lithium Battery Only

40 Reviews

$2,086 RRP: $2,825 Save: $739

Enerdrive B-TEC 125Ah Lithium Battery

Enerdrive B-TEC 125Ah Lithium Battery

6 Reviews

$1,535 RRP: $2,023 Save: $488

Enerdrive B-TEC 300Ah Lithium Battery

Enerdrive B-TEC 300Ah Lithium Battery

2 Reviews

$2,880 RRP: $4,221 Save: $1,341

Dometic Waeco CoolPower RAPS44

Dometic Waeco CoolPower RAPS44

7 Reviews

$310 RRP: $415 Save: $105