CTEK MXTS 70/50 12/24V 70/50A Battery Charger

Checking and charging for hard to reach batteries

The INDICATOR – Eyelet connector is ideal for charging and checking batteries that are difficult to get to or hidden. The ‘traffic light’ system shows your battery’s charge status simply and clearly. Connect the eyelet terminals to the battery, check the status, then plug the connector into your CTEK charger if the battery needs charging. It comes with a 2-year warranty.

• 55cm cable length
• Comes in two sizes to fit different battery terminals perfectly
• 15A fuse
• Splash and dust proof (IP65)

CTEK Panel M8 - 8.4mm 1500mm Cables & 15A Fuse -Indicating (BQ 40), 2 year warranty. Panel mounted for easy check and charge.

Specially designed for panel mounting, the INDICATOR – Panel uses a ‘traffic light’ system to show the battery charge level. Connect your charger to the socket on the Panel, mount the Panel in a convenient place, then route the cable to the battery. The Panel comes in two cable lengths to make charging easy, practical and convenient. It comes with a 2-year warranty.

INDICATOR – Panel uses a simple ‘traffic light’ system to show the state of charge of your battery. Available in two cable lengths, 1.5 m and 3.3 m. No cables are included in the INDICATOR – Panel with flat pin connection.

Features:

• 150cm cable length (part no. 56-380)
• 330cm cable length (part no. 56-531)
• Size of connector/indicator: 5mm x 21mm x 50mm
• 15A fuse
• Comes in two cable lengths with M8 8.4mm eyelet terminals

CTEK Clamps - 1000mm Cable & 15A Fuse - Indicating, 2 year warranty. Portable clamp and indicator for your CTEK charger.

The INDICATOR – Clamp uses a ‘traffic light’ indicator system for checking the state of your battery and quickly plugs into your CTEK charger if the battery needs charging. It’s practical, portable and easy to use, which makes it the ideal connector and indicator for checking several batteries in workshops or showrooms. It comes with a 2-year warranty.

Features:

• 1,5m cable length
• 15A fuse
• Splash and dust proof (IP65)

CTEK Cigarette Adaptors, 2 year warranty. Trouble free charging through your 12V socket

Connect – Cig Plug is an easy to fit adapter that allows charging from a CTEK compatible charger through the 12V cigarette lighter or accessory socket. 400 mm cable length. Compatible with all CTEK chargers up to 10A. It comes with a 2-year warranty.

Features:

• Universal model fits both 12mm and 21mm sockets
• 40cm cable length for convenient charging
• Compatible with all CTEK chargers up to 10A
• Socket must be powered even when ignition is in ‘off’ position
• Splash proof and dust proof (IP65)

CTEK Comfort M8 400mm long x 8.4mm Lugs/Eyelets, 2 year warranty. The easy fit connector for hard to reach batteries.

The CONNECT – EYELET connector is the ideal solution if your battery is difficult to get to, hidden or if you can’t use clamps. Just connect the easy to fit eyelet terminals to the battery and charge as usual. It comes with a 2-year warranty.

Features:

• 40cm cable length
• Splash and dust proof (IP65)
• Comes in three sizes to fit different battery terminals perfectly

CTEK Comfort M10 400mm long x 10.4mm Lugs/Eyelets. The easy fit connector for hard to reach batteries. The connect-eyelet connector is the ideal solution if your battery is difficult to get to, hidden or if you can’t use clamps. Just connect the easy to fit eyelet terminals to the battery and charge as usual.

Features:

• 40cm cable length
• Splash and dust proof (IP65)
• Comes in three sizes to fit different battery terminals perfectly
• 2 Year Warranty

Power your devices with your CTEK charger, 2 Year Warranty.

The CONNECT – Cig Socket connects to your CTEK charger so it can be used as a power source for electronic equipment such as mobile phones, GPS sat navs, handlebar heaters and heated clothing. It comes with a 2-year warranty.

Features:

• Universal female connector suitable for all standard 12V male connectors
• 10 cm cable length for convenient power
• Universal model fits both 12mm and 21mm sockets
• Compatible with all CTEK chargers up to 8A
• Socket must be powered even when ignition is in ‘off’ position

Extend the range of your CTEK charger. This systems ensures secure connection.

The CONNECT – Extension Cable is the convenient and secure solution if your CTEK charger needs to be further away from the battery or the vehicle. Simply connect the 2.5m cable to your charger’s accessory plug and attach the other end to the sockets on your accessories.

Features:

• 2.5m cable length to give your charger more range
• CTEK CONNECT system for a secure connection
• Suitable for use with all CTEK chargers up to 10A using the CONNECT system
• Splash and dust proof (IP65)

CTEK Pro Trolley, Charge Station, 2 Year Warranty. Carry all your battery management, laptop and other electrical analysis equipment together on TROLLEY PRO, the complete mobile test station.

The TROLLEY PRO is designed to carry a wide range of charging and testing equipment safely. Its tough, black powder coated steel frame and four wheels make the TROLLEY PRO easily manoeuvrable – even in small spaces – but the two wheel brakes keep it firm and still while you’re using it. Plus, there are plenty of hooks for neat cable storage and its versatile, pre-drilled panel lets you mount your preferred CTEK pro charger combination right where you want it. It comes with a 2-year warranty.

• A complete mobile test station for chargers, laptops, analysis instruments and batteries
• All your equipment in one place
• Perfect for flash programming and updating activity
• Black powder coated steel construction with large rubber wheels
• 4 x M4 x 20mm screws for charger mounting
• Load capacity: top plate 10kg; bottom shelf 25kg
• Wheel size (rear/front): 200mm/75mm
• Overall dimensions: 1060mm x 490mm x 590mm (HxWxD)
• Weight: approximately 22kg
• 2-year warranty

CTEK Wall Bracket to suit MXTS40 & MXTS70/50, 2 Year Warranty. Flexible storage for your CTEK workshop charger.

With the WALL HANGER PRO you can mount your CTEK workshop charger on the wall using the supplied metal bracket or you can also use the strap to carry it around with you. The WALL HANGER PROs durable rubber coated frame not only gives your charger extra stability, but also protects your vehicle against scratches. It comes with a 2-year warranty.

• Suitable for use with MXTS40 and MXTS70/50
• Hook for secure cable handling
• Includes mounting bracket and carrying strap
• Size: 500mm x 194mm x 100mm