Enerdrive Pro Series 45A TS, 40A DCDC inc SIMARINE + 400Ah 12V Slimline Lithium Battery & ePRO Inverter / Charger 3000W

Product Description

Enerdrive Pro Series 45A TS, 40A DCDC inc SIMARINE + 400Ah 12V Slimline Lithium Battery & ePRO Inverter / Charger 3000W, 5 Year Warranty

For the ultimate in RV energy and support you can’t go past an Enerdrive Pro Series power system. These systems are typically requested by those who wish to travel for extended periods of time and still wish to run many of the creature comforts we are accustomed to at home.

Enerdrive Pro Series Lithium owners enjoy the benefits of running their air conditioning systems, microwave, toaster, kettle, induction cook tops, as well as more traditional loads in a typical caravan such as lights, water pump, TV etc.

Enerdrive Pro Series System are easier than ever before to install.  The majority of the components are pre assemble and ready to go.  This makes for a fairly simple installation process. All you need to do is select which battery and battery monitor you prefer!

Speak to one of our friendly product experts for support in ensuring this is the best system for your needs. We are confident Enerdrive have a system capable of meeting your needs.

Enerdrive now endorses the use of a 3000W inverter with 2 x 200Ah B-Tec Lithium Batteries connected in parallel. Therefore, we are happy to recommend some better value 400ah bundles in the B-Tec range.

Click here to find out more: Enerdrive ePOWER B-TEC 2 x 200Ah Lithium Bundle with Parallel Cable Kit

K-PRO-1-C-SM-400 System Includes:

• 400Ah 12V Slimline Lithium Battery (not mounted to board)   EPL-400AH-12V-SLIM-V2
• ePOWER 12V 40A DC to DC Battery Charger to charge from the vehicle and portable solar    EN3DC40+ 
• Morningstar Tristar 45A Solar Controller to ensure the highest available energy from rooftop solar panels    SR-TS-45
• ePRO Combi Inverter/Charger 3000W-120A to run all of the creature comfort AC appliances (not mounted to board)    EPC-3000-12-KIT
• Simarine PICO Monitoring Screen for battery % capacity/loads/tanks/temperatures
• Applicable Battery & Trigger Cables

Important information:

When the installation is complete you are required to complete the commission procedure in order to ensure the system is fitted correctly and the Enerdrive fail safes built in to the system are functional. 

Enerdrive request that when your installation is complete you reach out to their team for a quick consultation and send images of the final installation to them for filing.  Their intension is to be as best prepared as possible to offer system support for the life of the system.   

Accessories: Cabling to connect the battery to the board is supplied. If connecting an inverter, you will need to purchase an appropriately sized cable from the accessories list. 

Enerdrive Pro Series Lithium Batteries:

Lithium Ion batteries have a high energy density and are perfect for cyclic applications. They offer savings of up to 70% in volume and weight compared to traditional lead-acid batteries. Lithium Ion batteries offer ultra-fast charging and discharging, high efficiency and three times as many charging cycles (>1500 full cycles) compared to traditional lead acid batteries.

Enerdrive’s Pro Series Lithium-iron-phosphate (LiFePO4) is the safest of the mainstream li-ion battery types. The nominal voltage of each cell is 3,2V. A 12,8V Enerdrive battery therefore consists of 4 cells connected in series.

All lithium Ion batteries require a battery management system (BMS). There is no way around this. There are numerous examples of catastrophic failures where no BMS has been used.

The Enerdrive Pro Series Lithium battery packs incorporate Active Cell Balancing across the range. The balancing method used is Dynamic Energy Transfer. This allows for automatic balancing of the cells during charging, discharging and storage. Any cells with high voltage density will transfer energy to the lower cells in the pack. This method of cell balancing utilises the energy within the battery pack to balance the cells unlike passive balancing systems which bleed this excess energy off as heat to keep the battery balanced at the top end of the charging cycle, wasting energy already stored within the battery.

The Enerdrive Active Balancing System also incorporates individual cell “Hi -Voltage & Low-Voltage” disconnect feature to interface with the Enerdrive Advanced BMS Driver, switching (off/on) of charging sources & consumer loads. Running Active Cell Balancing allows Enerdrive to parallel and series connect multiple batteries within the system. This offers 12v, 24v, 36v &,48v systems with up to the possibility of 1500Ah+ capacity.

The installation kit incorporates the Enerdrive Advanced BMS Rely Driver, ePRO or Simarine monitor, Main DC Fuse and a load disconnect latching relay. This kit is connected to the battery and designed to work hand in hand with the batteries Active Balancing System for controlling charging and discharging sources for ultimate protection of your investment.

Many companies will just sell you the battery and if lucky, you will get a BMS incorporated. They neglect to tell you that disconnecting loads and charging sources at the critical times requires more equipment to be installed to manage these operations.

Enerdrive ePOWER 12V 40A DC to DC Battery Charger:

Enerdrive ePOWER 12V 40A DC to DC Battery Charger designed to meet the rugged demands of Australian conditions and delivering multiple source charging for DC systems.

The Enerdrive ePOWER DC2DC Battery Charger is a fully automatic multistage, multi input battery charger with the ability to charge from either an alternator linked to a battery; or via solar power with the in built Maximum Power Point Tracking (MPPT) Solar Controller.

12V 40A DC2DC Battery Charger Features:

• Two totally independent DC Inputs for both engine and solar regulation charging one house battery bank output
• DC M6 screw terminals that will allow for large battery cable connection between all sources
• A dedicated Maximum Power Point (MPPT) solar regulator
• The same battery algorithms as included in our AC mains ePOWER battery charger including a specific lithium charging profile
• 40A output up to 40+°C with thermo controlled fan cooling
• Fully programmable LCD display to show which source is charging the battery along with charger status, voltage and amperage
• Temperature sensor included in charger for more accurate battery charging

For In Vehicle & Marine Wiring Diagram, click below:

For Towed Vehicle Wiring Diagram, click below:

Enerdrive ePRO Inverter / Charger 3000W:

The main task of the ePRO Combi Inverter Charger is to act as an uninterruptible AC power supply (UPS). In case of a grid/generator failure or disconnection, the ePRO Combi immediately stops charging the battery, releases the AC transfer switch and activates the inverter which takes over the supply to the connected loads. All this is achieved so fast, that even very critical loads like computers will continue to operate without any problems. In case the grid/generator is reconnected again and the voltage and frequency are within acceptable limits, the ePRO Combi activates the AC transfer switch and battery charger again, while deactivating the inverter. The connected loads are now supplied again by the grid/generator without any interruption.

Available in 12v, 24v or 48v models and ranging in sizes from 1600-3500w inverter output and 35-120A charger output, the ePRO Combi has a unit to suit nearly any application.

Additionally, the ePRO Inverter Charger offers features like :

• AC Input Power Boost, which temporarily assists weak AC input sources when the connected load needs more power than available from the grid or generator.
• AC Input Current Limit, which limits the maximum current consumed from the AC input source by the ePRO Combi. This limit is user adjustable.
• Power Factor Corrected AC Input, which optimizes energy efficiency and makes sure that the maximum amount of charging current is available from your AC source.
• Intelligent 4-stage charge programs, user programmable to fit any battery type.
• Fully programmable inverter, transfer switch and battery charger parameters, using the Dashboard for Windows software.
• Programmable alarm relay, for optimal control of external devices like generator starting or selective load disconnection.
• Freely assignable trigger input, which allows the user to control the ePRO Combi by external events.
• Temperature controlled fans, to guarantee silent operation under less than full load conditions.
• Temperature compensated battery charging, using the standard supplied battery temperature sensor for maximum battery lifetimes.

When installation space is at a premium, but maximum performance is required then look no further than the ePRO Combi range. With so many internal features the ePRO Combi will provide you with all the requirements for on-board power along with:

• AC Input Power Boost – The ePRO Combi is capable of temporarily assisting weak AC input sources when more power is needed than available (i.e. from small generators). This is beneficial when larger loads than both the generator or the inverter on their own could support; so let the ePRO Combi combine both of the AC sources for maximum load support capability.
• AC Input Current Limit – For those times when you have limited AC supply (i.e. portable generators), you can set the ePRO Combi to only charge at a maximum rate.
• Alarm Output Relays – Providing full configuration options for the alarm contacts PLUS convert external trigger commands into a number of ePRO Combi status changes.
• Also available on the larger 2000-3500w Combi’s are two fully configurable 16A 230v alarm relay outputs for controlling large AC loads like air conditioning. Along with two unique trigger inputs, it gives the end user virtually unparalleled control of their Enerdrive ePRO “Power Station”.

Morningstar TriStar 45 Amp Solar Controller

The Morningstar TriStar is a three-function controller that provides reliable solar battery charging, load control or diversion regulation.

• Highest Reliability – Large heat sink and conservative design enables operating at full ratings to 45°C.
• More Information – Optional meter displays extensive system and controller information, automatic self-test and reset. Displays in 5 languages.
• Communications Capability – RS-232 connects to a personal computer for custom settings, data logging and remote monitoring and control.
• Fully Adjustable – DIP switch provides user with choice of 7 digital presets. Additional custom settings via RS-232.
• Extensive Electronic Protections – Fully protected against reverse polarity, short circuit, over current, high temperature and over voltage.

Simarine Pico+ Display Battery Monitor:

PICO’s display unit is made of a sleek anodized aluminum casing and a thick Gorilla Glass with Anti-Reflective coating protecting the optically bonded high-contrast 3.5 inch IPS LCD display. It’s water and dust proof and can be mounted both indoors and outdoors. The screen brightness is automatically adjusted with a light sensor. The device is operated by four water tolerant CapSense touch buttons.