Victron 30A Battery Management System Bundle

SKU: BDL016 Learn More»

Free Shipping

FREE SHIPPING

This item is sent via Express Courier. All freight is fully insured.

Customer Reviews

Go to: Product Details

Go to: Specifications

Product Description

Victron 30A AC-DC & DC-DC Charger, 30A MPPT SmartSolar Charge Controller & Monitor Bundle, 5 Years Warranty.

Elevate Your Travel Experience with the Victron 30A Battery Management System Bundle. Seamlessly power your 12V appliances, extend your stay, and explore new horizons. Get the Victron 30A Battery Management System Bundle today and fuel your next thrilling escapade off the beaten path!

This bundle pack is designed to help facilitate 'off-grid' travel in your 4WD/Caravan/Camper Trailer. Use in conjunction with your solar panels and batteries to run your favourite 12v appliances and stay longer.

Pack Includes:

Victron Battery Monitor BMV-712 Smart - BAM030712000R
Victron SmartSolar MPPT 100/30 Charge Controller - SCC110030210
Victron Orion-Tr Smart 12/12-30A (360W) Non-isolated DC-DC charger - ORI121236140
Victron Phoenix Smart Charger 12/30(1+1) 120-240V, PSC123051095
Victron Mains Cord AU/NZ For Smart IP43 2m, ADA010100300

Victron Battery Monitor BMV-712 Smart - BAM030712000R

With Bluetooth built-in, the BMV Smart is ready for the Internet of Things (IoT) era. With Bluetooth being implemented in most other Victron Energy products, wireless communication between products will simplify system installation and enhance performance. The BMV-712 Smart battery monitor provides comprehensive real-time information about your battery bank's status. Monitor essential data such as voltage, current, capacity, and state of charge, allowing you to make informed decisions and optimize battery usage.

Features:

Battery voltage, current, power, ampere-hours consumed and state of charge
Remaining time at the current rate of discharge
Programmable visual and audible alarm
Programmable relay, to turn off non critical loads or to run a generator when needed
500 Amp quick connect shunt and connection kit
Shunt selection capability up to 10.000 Amps
VE.Direct communication port
Stores a wide range of historical events, which can be used to evaluate usage patterns and battery health
Wide input voltage range: 6,5 – 70V
High current measurement resolution: 10 mA (0,01A)
Additional input to measure voltage (of a second battery), temperature or midpoint voltage, and corresponding alarm and relay settings

Victron SmartSolar MPPT 100/30 Charge Controller: SCC110030210

A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life.

By constantly monitoring the voltage and current output of your solar (PV) panels, MPPT technology ensures that every drop of available power is rinsed out of your panels, and harvested for storage. The advantage of this is most noticeable when the sky is partially clouded, and light intensity is constantly changing.

Victron Orion-Tr Smart 12/12-30A (360W) Non-isolated DC-DC charger - ORI121236140

The Orion-Tr Smart DC-DC charger is a professional DC to DC adaptive 3-stage charger with built-in Bluetooth. For use in dual battery systems in vehicles or on boats where the alternator and the start battery are used to charge the service battery. This Victron battery charger can be monitored and programmed via Bluetooth and can be remotely controlled via a remote on/off switch.

Victron Phoenix Smart Charger 12/30(1+1) 120-240V - PSC123051095

With boat owners in mind this adaptive 5-step charger can provide either 30A or 50A of charge to each of three battery banks. Or the charger 1+1 model provides 3A to the starter-battery, the rest to the ‘house’ bank. 24V models are available with 16A/25A charge. Bluetooth enabled, you can monitor the charger and set alarms straight from your phone. Adaptive, intelligent, dynamic charge features – see the datasheet below.

MAINS CORD AU/NZ FOR SMART IP43 2M

A single spare or replacement Mains Cord to suit the Smart IP43 chargers, this is 2m long.

Go to: Product Details

Go to: Reviews

Specifications

SKU BDL016

Brand Victron

Warranty Period: 5 Years

Product Category Battery Management System

Output Current Rating (Amps) 30

Maximum Charge Current 40A (DC/DC Charger)

Temperature range -20 +50°C (Battery Monitor)

DC Input Voltage 10-17V (DC/DC Charger)

Charger Voltage 12V

Under Voltage Shutdown 7V (DC/DC Charger)

Charge voltage 'absorption' Defult setting: 14.4V / 28.8V (Adjustable) (Charge Controller)

Efficiency 98% (Max) (Charge Controller) | 87% (DC/DC Charger)

Charge current 30 A (Smart Charger)

Standby Current Less than 1 mA (DC/DC Charger)

DC Output Voltage 12,2V (DC/DC Charger)

Voltage ± 0,01V (Battery Monitor) | 12/24V Auto Select (Charge Controller)

Output System Voltage 12V (DC/DC Charger)

Operating Range (temp) -40 +50°C (-40 - 120°F) (Battery Monitor) |

Battery Capacity 1 - 9999 Ah (Battery Monitor)

Output 1

Input Voltage 85 250 VAC (Smart Charger)

Operating temperature range -30 to +60°C (full rated output up to 40°C) (Charge Controller) | -20 to +55°C (derate 3% per °C above 40°C) (DC/DC Charger) | -20 to +50°C (Smart Cha

Protection Battery reverse polarity (fuse, not user accessible), PV reverse polarity, Output short circuit and Over temperature (Charge Controller)

Humidity 95%, non-condensing

Short Circuit Current Isc(A) 60 (DC/DC Charger)

Go to: Specifications

Go to: Reviews