4WD & Camping
- Generators & Power
- Caravan Appliances
- Caravan Power & Electrical
- Caravan Hardware & Accessories
- 4WD & Camping
- Boating & Marine
- Off Grid Solar & Appliances
- Pressure Washers & Pumps
- Groundcare, Concreting & Tools
- SALE
Enerdrive ePOWER B-TEC 125Ah Lithium Battery
Enerdrive are proud to introduce the new ePOWER B-TEC 125Ah Lithium Battery with Smart Phone Monitoring Technology.
Available in 12v 100Ah & 125Ah capacities, the ePOWER B-TEC is designed and intended for use in deep cycle applications where a single battery is required that meets the amp hour capacity.
Smart Phone Monitoring System
The Enerdrive ePOWER B-TEC battery incorporates wireless Battery Monitoring Technology. By downloading the Android™ or Apple® app to your smartphone or tablet device, you can monitor the following information;
Battery Management System
The battery is also equipped with an internal LiFePO4 Battery Management System (BMS) that can monitor and optimize each Prismatic cell within the battery during normal operation. It will protect the battery pack from over charge, over discharge, over temperature & short circuit. The BMS helps to ensure safe and accurate operation of the battery.
Size & Weight Savings
Lithium v AGM Capacities;
(Based on standard depth of discharge for both Lithium (80%) and AGM (50%).
The ePOWER B-TEC battery provides 60% more usable power than its equivalent lead acid cousin and being nearly 50% lighter and 30% smaller makes for a superior alternative.
The ePOWER B-TEC battery is perfect for camper trailers, 4WD’s (AUX battery), caravans, small water craft, low power communication sites or any other application that requires the use of a single deep cycle battery that meets the amp hour capacity.
With over 5 years of researching, designing and testing lithium batteries and the associated charging systems, Enerdrive are at the forefront of lithium battery systems in Australia. Enerdrive are the only Australian company that can supply a fully integrated self-branded energy system to suit your setup.
With over 1200 complete systems in operation Australia wide, Enerdrive is regarded as the leader in the field of lithium batteries and energy systems for Mobile, Marine and Remote applications.
Please Note: The ePOWER B-TEC battery is not designed to parallel connect extra batteries to increase the overall capacity. This is due to the internal management system (BMS) which does not have the ability of physical connection to a second B-TEC BMS system for balancing of the cells between each battery.
If you are requiring a battery system larger than ePOWER B-TEC battery, please look at the Enerdrive Lithium Power Pack Systems which can offer this level of cell balancing protection.
Short Description | Enerdrive ePOWER B-TEC 125Ah Lithium Battery, 2yr Warranty |
---|---|
SKU | EPL-125BT-12V |
Brands | Enerdrive |
Amp Hours (Ah) | 125.0 Ah |
Battery Voltage | 12V |
Model | EPL-125BT-12V |
Nominal Voltage | 12.8V |
Nominal Capacity | 125Ah |
Cycle Life (DOD – 80% under controlled conditions) | ≥ 2000 Cycles |
Battery Charge Temperature | 0 ̴ 45°C |
Normal Charge Voltage CV/CC* | 14.40 Ì´ 14.60V |
Standby (Float) Voltage | 13.50 Ì´ 13.80V |
Maximum Charge Current | 60A @ 25°C for 30mins |
Recommended Charge Current for Maximum Life | ≤ 40A |
Battery Discharge Temperature | -20 ̴ 60°C |
Battery Output Voltage Range | 11.00 Ì´ 14.60V |
Maximum Discharge Current | 100A @ 25°C ± 5°C for 30mins |
Pulse Discharge Current | 450A for 1.0s |
Discharge Cut-off Voltage | ≤11.20V |
Dimensions (LxWxH) mm | L 318mm W 165mm H 215mm |
Net Weight (kg) | 15.0 Kg |
Quality | |
---|---|
Value | |
Price |
Hi Rob,
The manufacturers warranty period for the Enerdrive 125aH lithium batteries is 2 years.
Hi There
You can repalce your AGM with a lithium battery and keep the charger only if your charger is capable of charging lithium batteries.
Without a proper charger you will damage your battery.
Hi Nigel,
The ePOWER B-TEC battery is not designed to parallel connect extra batteries to increase the overall capacity. This is due to the internal management system (BMS) which does not have the ability of physical connection to a second B-TEC BMS system for balancing of the cells between each battery.
For details relating to the Enerdrive delivery process CLICK HERE
For details relating to the Enerdrive warranty CLICK HERE