Enerdrive B-TEC 100Ah Lithium Battery & ePRO+ Monitor Bundle

Enerdrive ePOWER 1000W Pure Sine Wave Inverter state of the art, easy to use design, this 1000W inverter will offer you reliable service for providing AC power and 5V USB power for your home, boat, caravan, 4WD or commercial vehicle.

The Enerdrive ePOWER 1000W Inverter can run many AC powered appliances when you need AC power anywhere. The 5V USB power can charge many USB powered devices.

Features

• Australian GPO Outlets
• True sine wave output is ideal for operating motor loads, and to reduce stress on surge protection circuitry, meaning potentially longer equipment life
• Audio alarm with warning/error codes to alert user to check inverter condition before unit shutdown
• Automatic shutdown protects overload, over temperature and low/high battery conditions
• High surge capacity for products that require more power to start (2 x constant)
• High efficiency conversion of battery available power to AC power
• Mounting brackets for permanent installation
• Heavy duty DC battery stud connectors
• Includes 5V USB port
• 5 Year warranty

Enerdrive ePRO Plus to Battery 50mm2 x 400mm Negative Cable Kit with 8mm Lugs, 5 Year Warranty. A customised cable kit manufactured and supplied by Enerdrive. The cable kit is designed to connect the battery Negative Terminal and the ePRO Shunt Negative Terminal.

Cable size corresponds to current draw.

A general guide for choosing the right cable:

• For a 2600W inverter, use the 95mm2 Negative Cable
• For a 2000W inverter, use the 70mm2 Negative Cable
• For No Inverter, use the 50mm2 Negative Cable

Pro Tip: It is best to keep the cable as short as possible.

Enerdrive ePRO Plus to Battery 50mm2 x 600mm Negative Cable Kit with 8mm Lugs, 5 Year Warranty. A customised cable kit manufactured and supplied by Enerdrive. The cable kit is designed to connect the battery Negative Terminal and the ePRO Shunt Negative Terminal.

Cable size corresponds to current draw.

A general guide for choosing the right cable:

• For a 2600W inverter, use the 95mm2 Negative Cable
• For a 2000W inverter, use the 70mm2 Negative Cable
• For No Inverter, use the 50mm2 Negative Cable

Pro Tip: It is best to keep the cable as short as possible.

Scope of supply:

• 1 x Negative cable 50mm2 x 600mm
• 2 x 8mm Lugs

Enerdrive 70mm2 x 200mm Battery Parallel Cable Kit, Positive & Negative, 5 Year Warranty. 

Enerdrive 70mm2 x 200mm Battery Parallel Cable Kit, Positive & Negative, 5 Year Warranty. Enerdrive Parallel cable kit to connect 2 x batteries together.

• If you have an Inverter up to 2000W or a system with no Inverter, the 70mm parallel kit is appropriate to use.
• If you have an Inverter running loads greater then 2000W, the 95mm parallel kit is recommended.