About Us
Testimonials
Promotions
Buyer's Guides
Delivery
Warranty
FAQ
Learning Centre
Contact Us
Home
4WD & Camping
Early Summer Sale, Up To 60% OFF!
Days
Hours
Minutes
Seconds
Product Description
Enerdrive 40A DC to DC Battery Charging Installation Kit, includes Circuit Breakers, Lugs and Heavy Duty 16mm ² Twin Core Cable, 2 year warranty.
Kit Includes:
- 12V 40A ePOWER DC2DC Battery Charger
- 70 Amp Manual Reset Circuit Breaker x1 Piece
- 60 Amp Manual Reset Circuit Breaker x1 Piece
- 16MM – 8mm Diameter Cable Lugs x12 Pieces
- 16mm ² Twin Core Cable 6 Meters
12V 40A DC2DC Battery Charger:
designed to meet the rugged demands of Australian conditions and delivering multiple source charging for DC systems.
The Enerdrive ePOWER DC2DC Battery Charger is a fully automatic multistage, multi input battery charger with the ability to charge from either an alternator linked to a battery; or via solar power with the in built Maximum Power Point Tracking (MPPT) Solar Controller.
Features:
- Two totally independent DC Inputs for both engine and solar regulation charging one house battery bank output
- DC M6 screw terminals that will allow for large battery cable connection between all sources
- A dedicated Maximum Power Point (MPPT) solar regulator
- The same battery algorithms as included in our AC mains ePOWER battery charger including a specific lithium charging profile
- 40A output up to 40+°C with thermo controlled fan cooling
- Fully programmable LCD display to show which source is charging the battery along with charger status, voltage and amperage
- Temperature sensor included in charger for more accurate battery charging
For In Vehicle & Marine Wiring Diagram, click below:
For Towed Vehicle Wiring Diagram, click below:
70 Amp Manual Reset Circuit Breaker:
Hi-Amp Circuit Breaker. 1/4"" Stainless Steel Studs 25-70amp. Typically used in auxiliary and accessory circuits in truck, bus RV's and marine applications. Others include battery charge and DC audio System.
Features:
- Rated Current: 70Amp
- Dimensions: 86 x 48.4 x 44.2mm
- Interrupt Capacity: 5KA @ 16Vdc | 3KA @ 32Vdc | 2KA @ 72 Dvc
- Voltage: Up to 48Vdc
- Calibration @ 25°C: 100% Hold 135% Trip (percentage of rating)
- Endurance: 400% A 14Vdc, 5000 cycles
60 Amp Manual Reset Circuit Breaker:
Hi-Amp Circuit Breaker. 1/4"" Stainless Steel Studs 25-70amp. Typically used in auxiliary and accessory circuits in truck, bus RV's and marine applications. Others include battery charge and DC audio System.
Features:
- Rated Current: 60Amp
- Dimensions: 86 x 48.4 x 44.2mm
- Interrupt Capacity: 5KA @ 16Vdc | 3KA @ 32Vdc | 2KA @ 72 Dvc
- Voltage: Up to 48Vdc
- Calibration @ 25°C: 100% Hold 135% Trip (percentage of rating)
- Endurance: 400% A 14Vdc, 5000 cycles
Specifications
| Short Description | Enerdrive 40A DC to DC Battery Charging Installation Kit, includes Circuit Breakers, Lugs and Heavy Duty 16mm ² Twin Core Cable, 2 year warranty |
|---|---|
| SKU | MYG-DC2DC40+KIT |
| Brands | Enerdrive |
| Product Type | Enerdrive 40A DC to DC Battery Charging Installation Kit, includes Circuit Breakers, Lugs and Heavy Duty 16mm ² Twin Core Cable |
| Model | EN3DC40+ (Battery Charger) |
| Output Current Rating (Amps) | 40.0 Amps |
| Charger Mode Output Voltage | 13.8V - 15.5V (Battery Charger) |
| Float | 13.0V - 13.8V (Battery Charger) |
| Equalize | 15.5V (Battery Charger) |
| Charging Control | Three Stages (Battery Charger) |
| DC Output | Single (Battery Charger) |
| Selectable Battery Type | Gel, AGM, Flooded, Lithium, Program (Battery Charger) |
| Charger Efficiency | 95% (Battery Charger) |
| Temperature Setting | Low/ Normal/ High (Battery Temperature Sensor Standard) (Battery Charger) |
Product Videos
Enerdrive ePOWER 12V 40A DC to DC Battery Charger Product Review
Enerdrive Power Systems for RV's
Enerdrive eTIPS - DC2DC - Cable Size Does Matter! (Please Note 200Ah Lithium Battery and 12V 40A DC to DC Battery Charger Shown)
Enerdrive eTips - Enerdrive ePower Battery Chargers
Write a Product Review
Product Faqs
-
Q:What size battery charger do I need for my lead acid battery I have in my camper?A:
A good battery charger rule of thumb for charging a lead acid battery, is using a charger with output current (amps) of 10-20% of the battery total stored capacity (Ah).
So, for example if the battery is 12V 100Ah, the charger need to be minimum of 10A and maximum of 20A. Often splitting the difference at 15% (so a 12V ~15A charger) is a good option. Happy charging!
Delivery
For details relating to the Enerdrive delivery process CLICK HERE
Warranty
For details relating to the Enerdrive warranty CLICK HERE
Best Sellers From This Category:
-
Enerdrive ePOWER 12V 40A DC to DC Battery Charger
SALE Price: $420
RRP: $520 Save $100
Save $100 (19%) off RRP of $520
-
Redarc 12V 25A In-vehicle DC to DC charger
$569
RRP: $610 Save $41
Save $41 (7%) off RRP of $610
-
Enerdrive ePOWER 12V 40A Battery Charger
SALE Price: $516
RRP: $639 Save $123
Save $123 (19%) off RRP of $639
As Featured In
- 194 Varsity Parade, Varsity Lakes, QLD, 4227.
- 2/85 William Street, Darlinghurst, NSW, 2010.
Note: My Generator is an online retailer. We do not have a shopfront/showroom at these locations.
