Front Runner Slimline 3 Roof Rack Kit for Toyota Land Cruiser 250 Prado

Front Runner Slimline 3 Roof Rack Bottle Opener, 3 Year Warranty. Never hunt for a bottle opener again. Bolt this durable Bottle Opener directly to the sides or back of your Dometic Front Runner Series Slimline 3 Roof Rack, and you’re instantly ready for camp-side refreshments.

Features:

• A Slimline 3 Bottle Opener for those "grab-a-cold-one" moments.
• Mount the Slimline 3 Bottle Opener on the sides or the rear of the Dometic Front Runner Series Slimline 3 Rack.
• The wide opening mouth opens sideward away from the vehicle, providing a spacious, spill-free solution.
• Made of 3CR12 and 304 stainless steel and sealed in the trusted black powder-coating as all Front Runner Dometic racks and accessories.
• Incudes installation hardware and fitment instructions.

Specifications:

• Dimensions: 45 x 62 x 52 mm (W x D x H)
• Weight: 0.15kg

Front Runner Slimline 3 Roof Rack Grab Handle, 3 Year Warranty. Get a rock-solid grip on your next adventure. The Slimline 3 Grab Handle bolts onto any side of your rack, giving you instant, heavy-duty leverage to reach your gear with confidence.

Features:

• A Grab Handle Bracket for the Dometic Front Runner Series Slimline 3 roof rack.
• Assists in accessing the gear on top of your rack.
• Made from black powder-coated 3CR12 stainless steel.
• It can be mounted along the left and right sides of the Dometic Front Runner Series Slimline 3 roof rack.
• Includes installation hardware and fitment guide.

Specifications:

• Dimensions: 63 x 120mm (H x W)
• Weight: 0.66kg

Front Runner Slimline 3 Grab Handle with Light, 3 Year Warranty. Easily reach the gear on your Dometic Front Runner Series Slimline 3 rack with this Slimline 3 Grab Handle/Light, which provides a secure grip. It features a 4.5W rock light and can be mounted on any side of your rack.

Features:

• A Handle/Rock Light Bracket for the Dometic Front Runner Series Slimline 3 roof rack.
• Assists in accessing the gear on your rack.
• Supplied with a 4.5W LED rock light for additional illumination.
• Made from black powder-coated 3CR12 stainless steel.
• It can be mounted along the sides of the Dometic Front Runner Series Slimline 3 roof rack.
• Includes stainless steel installation hardware and fitment guide.

Note: Some electrical connection required, Roof Rack Power Point recommended (sold separately).

Note: When powering your light, ensure your power cord is installed into the light before plugging it into the power source. Disconnecting would need to be done from the power source then the light.

Specifications:

• Dimensions:63 x 120mm (H x W)
• Weight: 0.74kg

Front Runner Slimline 3 Spade & Shovel Mount, 3 Year Warranty. Secure your spade, shovel, oar, or paddle with the new Slimline 3 Mount. It locks quickly onto your rack in three versatile positions, keeping your essential gear ready for whatever the trail throws your way.

Features:

• A spade/shovel mount that is designed for the Dometic Front Runner Series Slimline 3 roof rack.
• Mounts to the Slimline 3 in three (3) positions: Flat on-top of the rack / Angled on-top of the rack OR mounted to the side.
• Compatible with the Dometic Front Runner Series Slimsport rack in two (2) mounting positions: Flat on-top of the rack OR Angled on-top of the rack.
• The spade/shovel mount is able to hold a paddle/oar, it is advised to use 2 x Slimline 3 Spade or Shovel Mount for stability.
• Mount fishing rods and small diameter items by using the V-strap bracket.
• Made of 3CR12 stainless steel and finished in black powder coating.

Note: When mounting the spade/shovel mount in the side position, ensure you have adequate clearance to any other accessories such as roof top tents and awnings.

Specifications:

• Dimensions: 270 x 119.38 x 160.02mm (D x H x W)    
• Weight: 1.32kg

Front Runner Slimline 3 Camp Shower Arm, 3 Year Warranty. Get your Dometic Front Runner Slimline 3 rack ready for shower hour with the Slimline 3 Shower Arm. It mounts on either side of the rack and extends outward, allowing you to wash yourself next to your ride.

Features:

• Hang your shower bag away from your rack for more space to clean-up.
• The Shower Arm that extends 680mm away from the rack.
• Mounts along the left or right sides of the Dometic Front Runner Series Slimline 3 rack.
• Made of black powder coated 3CR12 stainless steel.
• Includes stainless steel hardware and fitting instructions.
• Maximum load rating 20kg (44lbs).

Specifications:

• Dimensions: 310 x 74.50mm (H x W)    
• Weight: 1.68kg

Front Runner Slimline 3 Axe Mounting Bracket, 3 Year Warranty. Get ready to chop things up with the Slimline 3 Axe Mount. The lockable stainless-steel cage keeps your axe head secure and out of the way when mounted on the side of the Dometic Front Runner Series Slimline 3 Roof Rack. Super simple and quick to install.

Features:

• The Slimline 3 Axe Mount is a safe and secure option for traveling with your long handled axe.
• Bolts onto the left or right slides of the Dometic Front Runner Series Slimline 3.
• Your axe head is housed and protected.
• Built from high-strength 3CR12 stainless steel, with a weather-resistant black powder-coated finish.
• Can be further locked with the Rack Accessory Lock / Small or padlock.
• Can accommodate most axe sizes.
• Mounting requires the axe handle to have hole diameter of 12mm (0.5"). Drilling maybe required..

Specifications:

• Dimensions: 178 x 142mm (H x W)
• Weight: 1.42kg

Front Runner Slimline 3 Antenna Mount Bracket, 3 Year Warranty. Stay connected anywhere, even off the grid. The Slimline 3 Antenna Mount secures your antenna to any side of your Dometic Front Runner Series Slimline 3 rack, featuring an intelligent 90° pivot mechanism that lets you fold it flat or instantly dial in the perfect angle.

Features:

• An Antenna mount that secures to either of the sides or to the rear of the Dometic Front Runner Series Slimline 3 rack.
• The Slimline 3 Antenna Mount can secure Fiberglass antennas (less then 1meter long), Whip Antennas and magnetic base Antennas.
• The Slimline 3 Antenna mount can pivot a total of 90 degrees, forward or backwards from the upright position, at 30 degree increments.
• Tucks away neatly in the Clamping Bracket to ensure your aerial/antenna is securely held in place when not in use.
• A index pin allows the aerial/antenna to be dropped down.
• Made of black powder coated 3CR12 stainless steel.
• Stainless steel installation hardware and fitment guide included.

Specifications:

• Dimensions: 81.40 x 119mm (H x W)
• Weight: 1.56kg

Front Runner Slimline 3 Quick Release Awning Mount, 3 Year Warranty. Mount your awning to your Dometic Front Runner Series Slimline 3 rack in seconds. This heavy-duty, lockable quick-release bracket system lets you remove or refit your awning without tools.

Features:

• Once these brackets are installed on your Dometic Front Runner Series Slimline 3 Rack, no additional tools are needed to remove or refit the awning.
• These Slimline 3 Quick Release Awning Mounts bolt onto the side of your Dometic Front Runner Series Slimline 3 roof rack.
• Two (2) self-aligning stainless steel bobbins are secured to the awnings mounting channel using the supplied fasteners.
• Simply release the 2 latches and lift the awning away in seconds.
• Works with all Dometic Front Runner Series Awnings and other popular awning brands like Eezi-Awn, Oz Tent, etc.
• The brackets are small, unobtrusive and can be left on the roof rack when the awning is not mounted.
• No awning modification required.
• Removed awnings can be stored using the wall mount brackets supplied.

Note: Not suitable for 180 / 270 degree awnings. Weight limit: 20kg

Specifications:

• Dimensions: 881.40 x 119mm (H x W)
• Weight: 4.69kg

Front Runner Slimline 3 Recovery Board Side Mount Bracket, 3 year Warranty. Securely mount your recovery boards or tracks on the side of your Dometic Front Runner Series Slimline 3 rack. This rugged, adjustable, and lockable steel bracket detaches easily, leaving an ultra-discreet footprint.

Features:

• These tough brackets securely mount MAXTRAX, TRED Pro, TRED GT and other similar hole spacing recovery devices to the side profile of your Dometic Front Runner Series Slimline 3 Roof Rack.
• Adjustable in height and angle to compliment various vehicle profiles.
• Includes bolts for holding either 1 or 2 pairs of MAXTRAX/TRED Pro/GT.
• Easily remove the Pillar Brackets and Side profile brackets leaving behind a decreet 40mm / 1.6" high slat bracket on your Dometic Front Runner Series Slimline 3, for when the recovery boards are not in use.
• For added security and peace of mind and to secure your MAXTRAX to the Slimline 3 Recovery Board Side Mount Bracket, the Rack Accessory Lock / Large can be used to lock your recovery boards to the Dometic Front Runner Series Slimline 3 Rack.
• When MAXTRAX mounting Pins* (sold separately) are in use: A padlock can be used to lock your recovery boards to the Dometic Front Runner Series Slimline 3 Rack.
• Made of 3CR12 stainless steel, finished with the same durable, weather resistant black powder-coating as the Dometic Front Runner Racks.
• The included bolts can be substituted with the MAXTRAX Mounting Pin Set (sold separately) to lock MAXTRAX in place.

Note: MAXTRAX Mounting Pin Set XTREME is required when mounting 2 pairs of MAXTRAX EXTREME.

Recovery boards that can be fitted include: 

• 2 x MaxTrax Mini
• 3 x MaxTrax Mini & 1 x Jaxbase
• 2 x MaxTrax Lite, 4 x MaxTrax Lite
• 2 x MaxTrax MKII, 4 x MaxTrax MKII
• 2 x MaxTrax Xtreme, 4 x MaxTrax Xtreme
• 2 x Tred Pro, 4 x Tred Pro
• 2 x Tred GT
• 4 x Tred GT

Specifications:

• Dimensions: 327 x 256mm (H x W)    
• Weight: 2.49kg

Front Runner Slimline 3 Quick Release 270° Awning Mount Warranty. Mount your 270° awning to your Dometic Front Runner Series Slimline 3 rack in seconds. This heavy-duty, lockable quick-release bracket system lets you remove or refit your awning without tools.

Features:

• A set of Quick Release brackets to secure your 270˚ Awning to the Dometic Front Runner Series Slimline 3 roof rack.
• These Slimline 3 Quick Release 270˚ Awning Mount bolts to the side profile of your Dometic Front Runner Series Slimline 3 roof rack.
• The four (4) self-aligning stainless steel bobbins secure to your awning base.
• Once the Slimline 3 Quick Release 270˚ Awning Mounts are installed onto a Slimline 3 roof rack, no additional tools are needed to remove or refit the awning.
• Simply release the 2 latches and lift the awning off in seconds.
• No wrenching in tight spaces during the “off-season” or time-consuming weekday removals of the awning.
• The brackets can be left on the roof rack when the awning is not mounted.
• No awning modification required.
• Supplied with all required mounting hardware and fitting instructions.

Note: Always ensure your 270˚ awning is secured down via guy ropes in case of any gusts of wind. Weight limit: 30kg

Specifications:

• Dimensions: 190 x 182mm (H x W)    
• Weight: 3.90kg