Evakool Premium Bottle Opener

Take your Evakool fridge/freezer to the next level with our handy bottle opener. Evakool branded bottle opener is suited to fibreglass products only. Made from premium 301 stainless steel, these are designed to withstand all environments.

Evakool branded bottle opener suited to fibreglass series only. Made from premium 301 stainless steel, these are designed to withstand all environments.

This kit contains:

• 1 x Evakool bottle opener
• 2 x 5-5 peel rivets

You will be required to use:

• Drill
• Rivet gun
• Pencil
• 11/64th drill bit

Instructions:

1. Select an appropriate position on your fibreglass icebox or refrigerator.
2. Be mindful of room needed to use handles and latches, we recommend to not attach it too close as to obstruct use.
3. Hold the bottle opener in the desired position, use a pencil to mark where holes are to be drilled.
4. Drill the 2 x holes with a 11/64th drill bit. The hole only needs to go through the outer skin of the box. We recommend using a drill depth guide to stop from drilling the inner liner. The depth of the outer skin is 5mm.
5. Using the 2 x peel rivets supplied, attach the bottle opener with a rivet gun or rivet pliers.

DO NOT: attach the bottle opener above or near electrical connections, motor cover or control panels, as liquid from the bottle can destroy electronics AND will void warranty of electronics. Please note; only use the peel rivets supplied, they are special rivets designed for fibreglass. Using normal blind rivets will crack fibreglass.