Victron Blue IP22 Smart Charger 24/16, 3 Outputs
Save $79 (19%) off RRP of $420
Product Description
Victron Blue IP22 Smart Charger 24/16, 3 Outputs, 5 year warranty. The Blue Smart IP22 Charger is the new professional battery charger with built-in bluetooth. The Blue Smart IP22 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans.
The battery is charged, smartly... to perfect condition:
The seven-step charging algorithm gets the best out of your battery. The charger gives the battery the power it needs, maintains its health, ensures better performance... and a longer life.
Recovery of deeply-discharged 'dead' batteries:
Unlike other brands, the Blue Smart IP22 Charger will attempt to recharge a deeply-discharged battery by force-feeding it with a low current. Normal charging will then be resumed as soon as there is sufficient voltage across the battery terminals.
Check the status of your battery remotely:
The Blue Smart IP22 is equipped with built-in Bluetooth, so the status of the charger and the battery can be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect app.
Bluetooth Smart:
The Blue Smart IP22 Charger is the wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available.
High efficiency:
With up to 94% efficiency, these chargers generate up to four times less heat when compared to the industry standard. And once the battery is fully charged, power consumption reduces to 0,5 Watt, some five to ten times better than the industry standard.
Adaptive 6-stage charge algorithm: test - bulk – absorption - recondition – float – storage:
The Blue Smart Charger features a microprocessor controlled ‘adaptive’ battery management. The adaptive feature will automatically optimize the charging process relative to the way the battery is being used.
Storage Mode: less maintenance and aging when the battery is not in use:
The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 2,2V/cell (13,2V for a 12V battery) to minimize gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulfation, a major cause of early battery failure.
Also charges Li-ion (LiFePO₄) batteries:
LiFePO₄ batteries are charged with a simple bulk – absorption – float algorithm.
NIGHT and LOW setting:
When in NIGHT or LOW mode, the output current is reduced to max. 50% of the nominal output and the charger will be totally noiseless. The NIGHT mode automatically ends after 8 hours. The LOW mode can be ended manually.
Protected against overheating:
Output current will reduce as temperature increases up to 50°C, but the Blue Smart Charger will not fail.
Eleven LEDs for status indication:
- Charge algorithm: TEST / BULK / ABSORPTION / RECONDITION / FLOAT / STORAGE / READY.
- MODE button to set: NORMAL (14,4V) / HIGH (14,7V) / RECONDITION / LI-ION.
Specifications
SKU BPC241648012
Brand Victron
GTIN 8719076052524
Warranty Period: 5 Years
Product Category Battery Chargers
Output Current Rating (Amps) 16
Model BPC241644012
Charge Voltage Float - Wet (25 degrees)** Normal: 27.6V | High: 27.6V | Li-ion: 27.0V
Charge current 16 A
Input Voltage 180 – 265 VAC
Battery-connection Screw terminals 13 mm² / AWG6
Dimensions 108 x 65 x 235 mm (L x W x H)
No load power consumption 0.5 W
Charge voltage 'storage' Normal: 26.4V | High: 26.4V | Li-ion: 27.0V
Protection category IP22
Output System Voltage 24V
Operating temperature range -20 to +50°C
Protection Battery reverse polarity (fuse), Output short circuit, and Over temperature
Charger Voltage 24V
Net Weight (kg) 1.3
Charge Algorithm 6-stage adaptive
Charge voltage 'absorption' Normal: 28.8V | High: 29.4V | Li-ion: 28.4V
Efficiency 94%
Output 3
Humidity Max 98%
Charge current in low current mode 8 A
Can be used as power supply Yes
Customer Reviews
Product Q&A
-
What size battery charger do I need for my lead acid battery I have in my camper?
A good battery charger rule of thumb for charging a lead acid battery, is using a charger with output current (amps) of 10-20% of the battery total stored capacity (Ah).
So, for example if the battery is 12V 100Ah, the charger need to be minimum of 10A and maximum of 20A. Often splitting the difference at 15% (so a 12V ~15A charger) is a good option. Happy charging!
-
Can a multiple outlet charger such as a Victron charge two different ( flooded and AGM) batteries at the same time?
Hi There,
That should not be an issue whatsoever.
Warranty
For details relating to this product's warranty CLICK HERE
Delivery
For details relating to our delivery process CLICK HERE
Best Sellers From This Category:
Take $30 OFF Your Order*
Enter your details below to subscribe to the My Generator newsletter and get your unique promo code.
*$300 minimum spend, single use promo code.