Mid Season Sale, Up To An Extra $40 OFF!

 
Days
 
Hours
 
Minutes
 
Seconds
My Account

You have no items in your shopping cart.

Revolution 100Ah Lithium Battery 4x4 Charging Solution, 50 Amp

price: 2850final price: 2850
Revolution 100Ah Lithium Battery 4x4 Charging Solution, 50 Amp Review  |  Q&A  | 
why-do-we-like-revolutionpower

$2,850

Take an Extra $40 Off! Add product to the cart to get an instant discount
FREE Shipping

Ask a question (0)

Learn More About Zipmoney Payment

In stock, dispatch 1 - 2 days

Express Shipping Price Match Guarantee Customer Reviews

Quick Overview

Revolution 100Ah Lithium Battery + Redarc BCDC1250D + Victron Battery Protect, 50 Amp, 3 Year warranty

Product Description

Revolution 100Ah Lithium Battery + Redarc BCDC1250D + Victron Battery Protect, 50 Amp, 3 Year warranty. 

Pack Includes:

  • Revolution Power 12v 100Ah Lithium Battery
  • RedArc BCDC1250D 50A battery charger
  • Victron Battery Protect 12/24V-65A
  • Victron Smart Battery Monitor BMV-712
 

Revolution Power 12v 100Ah Lithium Battery

Revolution Power Australia’s lithium batteries are the ultimate in deep-cycle battery technology, delivering unrivalled performance and product life span. They have Australia’s most advanced state of the art Battery Management System (BMS) inbuilt for peace of mind when it comes to battery protection and safety.

The Revolution Power Australia 12Volt 100Ah Lithium Battery is Australia’s favourite choice when it comes to reliable, robust and quality lithium batteries. Its quick re-charge and constant voltage make it perfect for 4wd’s and caravaners in search of dependable power, when 240v power is unavailable. It’s light weight and standard size make it perfect for 4wder’s and caravaners in search of a dependable power source when there is no 240v power.

When used in parallel, they can power a 2000W inverter to charge all your gadgets, as well as run major appliances like toaster, coffee machine and fridges. This particular setup has been adopted by the caravan industry throughout Australia, as well as being the popular choice for Pat Callinan and MR 4×4.

Benefits:

  • Up to 1/3 the weight of traditional AGM batteries
  • Faster recharge times than AGM’s
  • Up to 5000 cycles at 50% depth of discharge
  • Purposely built for Caravans, Camper trailers, Motor homes, 4WD, Marine Vessels, Trucks
  • In built BMS to control cell balancing, over and under voltage protection, short circuit protection
  • Use in parallel to increase your capacity for longer storage
  • Proudly Australian owned and operated
NOTE: The manufacturer advises that Revolution Power Lithium Batteries must be charged via lithium battery chargers from Redarc or Victron. This is due to the required charging profile. Please see the manufacturer approved battery charger models listed above under 'Accessories'. Note: Failure to use a battery charger authorised by the manufacturer may void warranty. 

Revolution Power Product Card


Redarc BCDC1250D 50A battery charger

The REDARC BCDC1250D In-vehicle Battery Charger is a 12V 50A In-vehicle DC to DC battery charger. It is the latest variant of the award-winning BCDC Dual range and features REDARC’s Smart Start technology. Styled with a red line running down its back tells you there’s something different about this dual battery charger. A 50-amp charging output makes it the most powerful in REDARC’s BCDC range. The BCDC1250D has been developed to provide a higher current output, it features an additional charging stage known as Soft Start which has been engineered to handle more demanding applications.

The award-winning technology in the BCDC has been independently verified and tested to ensure battery life is maximised, charging your battery to a proven 100%. Built in Australia and tested for our unique conditions, the DC to DC battery charger will work in the extreme heat of the Simpson Desert, up to 80°C and can handle deep water crossings at Cape York – water, dust and vibration are no match for this charger.

Ashdown Ingram Product Manual

 

Victron Battery Protect 12/24V-65A

The BatteryProtect disconnects the battery from non essential loads before it is completely discharged (which would damage the battery) or before it has insufficient power left to crank the engine.

12/24V auto ranging: The BatteryProtect automatically detects system voltage

Programming made easy: The BatteryProtect can be set to engage / disengage at several different voltages. The seven segment display will indicate which setting has been chosen.

A special setting for Li-ion batteries: In this mode the BatteryProtect can be controlled by the VE.Bus BMS.
Note: the BatteryProtect can also be used as a charge interrupter in between a battery charger and a Li-ion battery. See connection diagram in the manual.

Ultra low current consumption: This is important in case of Li-ion batteries, especially after low voltage shutdown. Please see our Li-ion battery datasheet and the VE.Bus BMS manual for more information.

Over voltage protection: To prevent damage to sensitive loads due to over voltage, the load is disconnected whenever the DC voltage exceeds 16V respectively 32V.

Ignition proof: No relays but MOSFET switches, and therefore no sparks.

Delayed alarm output: The alarm output is activated if the battery voltage drops below the preset disconnect level during more than 12 seconds. Starting the engine will therefore not activate the alarm. The alarm output is a short circuit proof open collector output to the negative (minus) rail, max. current 50 mA. The alarm output is typically used to activate a buzzer, LED or relay.

Delayed load disconnect and delayed reconnect: The load will be disconnected 90 seconds after the alarm has been activated. If the battery voltage increases again to the connect threshold within this time period (after the engine has been started for example), the load will not be disconnected. The load will be reconnected 30 seconds after the battery voltage has increased to more than the preset reconnect voltage.

Victron BPU12/30-3 Product Card

Victron BPU12/30-3 Product Manual

 

Victron Smart Battery Monitor BMV-712

With Bluetooth built-in, the BMV Smart is ready for the Internet of Things (IoT) era. With Bluetooth being implemented in most other Victron Energy products, wireless communication between products will simplify system installation and enhance performance.

Bluetooth inside: With Bluetooth built-in, the BMV Smart is ready for the Internet of Things (IoT) era. With Bluetooth being implemented in most other Victron Energy products, wireless communication between products will simplify system installation and enhance performance.

Download the Victron Bluetooth app: Use a smartphone or other Bluetooth enabled device to customize settings, monitor all important data on single screen, view historical data, and to update the software when new features become available.

Easy to install: All electrical connections are to the quick connect PCB on the current shunt. The shunt connects to the monitor with a standard RJ12 telephone cable. Included: RJ 12 cable (10 m) and battery cable with fuse (2 m); no other components needed. Also included are a separate front bezel for a square or round display appearance, a securing ring for rear mounting and screws for front mounting.

Midpoint voltage monitoring: One bad cell or one bad battery can destroy a large, expensive battery bank. When batteries are connected in series, a timely warning can be generated by measuring the midpoint voltage. Please see the BMV manual, section 5.2, for more information. Victron recommend their Battery Balancer (BMS012201000) to maximize service life of series-connected lead-acid batteries.

Very low current draw from the battery:

  • Current consumption: 0,7Ah per month (1mA) @12V and 0,6Ah per month (0,8mA) @ 24V Especially Li-ion batteries have virtually no capacity left when discharged until low voltage shutdown.
  • After shutdown due to low cell voltage, the capacity reserve of a Li-ion battery is approximately 1Ah per 100Ah battery capacity. The battery will be damaged if the remaining capacity reserve is drawn from the battery. A residual current of 10mA for example may damage a 200Ah battery if the system is left in discharged state during more than 8 days.

Bi-stable alarm relay: Prevents increased current draw in case of an alarm.

Victron BPU12/30-3 Product Card

Victron BPU12/30-3 Product Manual

Specifications

Short Description

Revolution 100Ah Lithium Battery + Redarc BCDC1250D + Victron Battery Protect, 50 Amp, 3 Year warranty

SKU RPL12-100Kit
Brands Revolution Power
Amp Hours (Ah) 100.0 Ah
Product Type Lithium Battery, DC to DC Battery Charger, Battery Protect and Battery Monitor.
Cell Type Pouch Cells – LiFePO4 (Battery)
Output System Voltage 12 VDC (Battery Charger)
Input Fuse Rating 60A (Battery Charger)
Battery Types M8 (Battery)
Enclosure Class IP54 (Battery) | Electronics: IP67 (potted) Connections: IP00 (Battery Protect)
Nominal Voltage 12.8 V (Battery)
Nominal Capacity 100 Ah (Battery)
Max. Continuous Discharge 100A (Battery) | 60A (Battery Charger) | 65A (Battery Protect)
Short circuit protection 200-500us (Battery)
Temperature Range Optimum: -10 ~50ºC, Operational: -40 ~ 80 ºC, Storage: -40 ~ 120 ºC (Battery) | Full load: -40°C to +40°C (up to 60% of nominal load at 50°C) (Battery Protect) | -40 +50°C (Battery Monitor)
Cycle Life (DOD – 80% under controlled conditions) 2000 (Battery)
Maximum Charge Current 100A (Battery)
Recommended Charge Current for Maximum Life 5-60A (Battery)
Pulse Discharge Current 400a Pulse 2-4 Sec (Peak) (Battery)
Charge Cut-off Voltage 15.6V (Battery)
Voltage 14.6V ± 0.2V (Battery) | 9 - 32VDC (Battery Charger) | 6 –35V (Battery Protect) | 6,5 - 70 VDC (Battery Monitor)
Quality Features Polycarbonate material (Battery)
Manufacturers Warranty 3 Years

Product Videos

The Best Caravan Battery?

 

What Will My Camping Battery Run?

 

Revolution Power Australia's Lithium Batteries

 

What's the go with Lithium Dual Batteries for Camping and 4x4??

 

What is a REDARC BCDC and what does it do?

 

Common BCDC Tech Tips from REDARC

 

How to optimize the BMV-700 series sync parameters | Victron Energy

 
Write a Product Review
 

Product Faqs

Ask a Question

No Faqs Found !

Delivery

 

For details relating to the Revolution Power delivery process CLICK HERE

Warranty

 

For details relating to the Revolution Power warranty CLICK HERE

Best Sellers From This Category: