Powerlite Honda 8kVA Generator Worksite Approved

Specifications

SKU PH080WS4GWHRF

Brand Powerlite

Warranty Period: 2 Years + 1 Year Alternator

Product Category Portable Generators

kVA 8

Continuous Output (kW) 6.8

Continuous Output (Watts) 6800

Fuel Petrol

Fuel Tank Capacity 6.5L

Starting Method Recoil

Voltage 240V

Cont. Working Time 2.8hr

Engine Honda GX390

Output Type 2 x 15A IP66 rated weatherproof outlets with RCD

NOTE Product specifications provided by Manufacturer. This is a portable air-cooled petrol generator designed for short term/standby applications - for pri

Frequency 50Hz

Product Dimensions (mm) LxWxH 760x500x540mm

Net Weight (kg) 70

Engine Warranty 4 year warranty

Engine Warranty 3 year Engine Warranty

Alternator Type Mecc Alte

Noise @ 7m 74

Videos

Powerlite Generators Australia

Powerlite Petrol Generator User Guide:

8kVA Honda Powered Petrol Generator; the number 1 choice for Trade and Farming applications:

Powerlite Australia - Powerlite Powered By Honda

Customer Reviews

Write a product review

Product Q&A

• Are these Powerlite generators using legitimate Honda engines? Some cheap brands use Honda engine rip-offs.

  Hi there – Most definitely yes. The Powerlite Petrol Generators use 100% authentic Honda engines purchased from Honda Australia. The engines come with a full 3 year commercial warranty, along with a 2 year generator warranty for frame, alternator etc. You can have the engine serviced or inspected by any approved Honda service agent around the country - there are more than 400 accredited service agents.

  We are aware of some cheaper brands using imported "Honda" engines in generators and other power equipment which are not authentic engines from Honda Australia. We do not stock any products that use non-verified Honda engines. Powerlite have been manufacturing generators in Australia for over 50 years and are a leading brand for tradesmen, farmers, mining companies, and professional contractors requiring portable power.

• How would this unit cope with a 10cfm compressor as well as a drop saw going at the same time?

  Hi Kevin, compressors and drop saws are definitely popular pieces of equipment to run from this Powerlite Honda 8kVA Generator model. In terms of sizing, ideally you would know the exact max (starting) power draw (either in watts or amps) of your compressor and drop saw. You should be able to get this info from the product manual / data plate, or by calling the product manufacturer directly. Failing that, an electrician can always take a reading on the starting power draw of your appliances.   

  However as an approximate guide, the compressor you have mentioned appears to be around the 3 horsepower (approx.) size, which can draw around 5000 – 8000 watts on start up depending on the compressor make and model. A 10 inch drop saw will draw around 2000 watts (approx.), so again it depends the size of your drop saw. Note that this generator will also be able to handle some power overload for a short period. 

  In summary, this generator is designed to run compressors and drop saws on work sites, but just to be certain it can handle your particular pieces of equipment at the same time, you should find out the starting power requirements.

• In terms of warranty, where can I find details of service agents for Powerlite Generators?

  Powerlite use premium grade components in all their generators. Starting with the engine, all of the engine manufacturers have national service agent and spare parts networks. The links below will help you with details of their respective service agents:

  For their petrol range, Powerlite mostly use Honda engines from Honda Australia. The Honda service agent network is listed HERE.

  Some petrol models have Briggs & Stratton / Vanguard engines, with their service agents listed HERE.

  For their diesel range, they use both Yanmar Engines and Hatz Engines.

  For specific generator/alternator warranty, servicing and spare parts inquiries for Powerlite Generators, you can find information HERE.

• Can I use this generator to charge my power tool batteries?

  Hi there,

  Charging battery packs is fine from a conventional generator, we'd recommend having a steady load on the generator and don't connect appliances that will cause the load to jump around during charging.

  Thanks.

• How will it go running a small inverter welder say around 160amps?

  Hi, for welders; we always recommend you give the manufacturer of your welder a call (e.g. Unimig, Cigweld etc.) and ask them two things:

  1. What size generator do they recommend to run your particular welder model?
  2. What type of generator is required to run your model? (i.e. is an inverter generator required?)

  Typically, a conventional style 7-8kVA generator (like this one) will run a large number of welder models on the market, however some models require more power and a certain power type. So, its best to double check with the welding manufacturer to ensure you get the right generator for your particular welder make/model.

   

Warranty

Delivery