Enerdrive eSYSTEM-J 60A AC / 40A DC with TriStar 45ASolar Reg & ePRO+

The Enerdrive ePOWER 2000W 12V Pure Sine Wave state of the art, easy to use inverter will offer you reliable service for providing AC power for your home, boat, 4WD, truck or Caravan.

The ePOWER 2000W Inverter incorporates a 16A AC Transfer Switch which allows for seamless AC power transfer between Mains/Generator and Inverter. This helps to keep your appliances running with almost no break time on AC transfer and allows for a much simpler installation on-board. This inverter is built to operate basic equipment such as power tools, computers, microwave ovens, televisions and other appliances that use up to 2000W of power for operation.

Features

• Seamless 16A AC Internal Transfer Switch
• AC RCD/Safety Switch with test button
• Removable LED Remote Control Display Panel
• Regulated Pure Sine Wave Output
• Silent Operation
• Compact Size for Easy Installation
• USB Port for charging USB devices
• PS6 Mode
• AC Transfer Cable
• 5 Year warranty

The Enerdrive ePOWER 2600W 12V Pure Sine Wave state of the art, easy to use inverter will offer you reliable service for providing AC power for your home, boat, 4WD, truck or Caravan.

The ePOWER 2600W Enerdrive Inverter incorporates a 16A AC Transfer Switch which allows for seamless AC power transfer between Mains/Generator and Inverter. This helps to keep your appliances running with almost no break time on AC transfer and allows for a much simpler installation on-board. This Enerdrive inverter is built to operate basic equipment such as power tools, computers, microwave ovens, televisions and other appliances that use up to 2000W of power for operation.
 

Features

• Seamless 16A AC Internal Transfer Switch
• AC RCD/Safety Switch with test button
• Removable LED Remote Control Display Panel
• Regulated Pure Sine Wave Output
• Silent Operation
• Compact Size for Easy Installation
• USB Port for charging USB devices
• PS6 Mode
• AC Transfer Cable
• 5 Year warranty

Enerdrive cable Kit 70mm2 x 1000mm POS & NEG to suit Enerdrive DIY Boards, Canopy Systems & Pro Series Systems.

Important notes depending on your system:

Enerdrive eSYSTEM / DIY Board:

If you have or are purchasing a 2000W inverter with your eSYSTEM / DIY Board, you will need to purchase 2 of these cables (one for battery to board and another one for board to inverter).

Choose 1m (1000mm) or 1.5m (1500mm) depending on how far away you mount the inverter from the board. Tech tip: mount the inverter as close to the board as possible!

If you are not choosing an inverter, you will only need one cable (battery to board).

Enerdrive Pro Series (White Lithium Box):

If you are purchasing the Enerdrive Pro Series (white Lithium Box), you will receive one of these sets cables included in the purchase. Therefore, for an inverter purchase, you will only need to purchase one of these sets of cables.

Enerdrive cable Kit 70mm2 x 1500mm POS & NEG to suit Enerdrive DIY Boards, Canopy Systems & Pro Series Systems.

Important notes depending on your system:

Enerdrive eSYSTEM / DIY Board:

If you have or are purchasing a 2000W inverter with your eSYSTEM / DIY Board, you will need to purchase 2 of these cables (one for battery to board and another one for board to inverter).

Choose 1m (1000mm) or 1.5m (1500mm) depending on how far away you mount the inverter from the board. Tech tip: mount the inverter as close to the board as possible!

If you are not choosing an inverter, you will only need one cable (battery to board).

Enerdrive Pro Series (White Lithium Box):

If you are purchasing the Enerdrive Pro Series (white Lithium Box), you will receive one of these sets cables included in the purchase. Therefore, for an inverter purchase, you will only need to purchase one of these sets of cables.

Enerdrive cable Kit 95mm2 x 1000mm POS & NEG to suit Enerdrive DIY Boards, Canopy Systems & Pro Series Systems.

Important notes depending on your system:

Enerdrive eSYSTEM / DIY Board:

If you have or are purchasing an inverter up to 3000W with your eSYSTEM / DIY Board, you will need to purchase 2 of these cables (one for battery to board and another one for board to inverter).

Choose 1m (1000mm) or 1.5m (1500mm) depending on how far away you mount the inverter from the board. Tech tip: mount the inverter as close to the board as possible!

If you are not choosing an inverter, you will only need one cable (battery to board).

Enerdrive Pro Series (White Lithium Box):

If you are purchasing the Enerdrive Pro Series (white Lithium Box), you will receive one of these sets cables included in the purchase. Therefore, for an inverter purchase, you will only need to purchase one of these sets of cables.

Enerdrive cable Kit 95mm2 x 1500mm POS & NEG to suit Enerdrive DIY Boards, Canopy Systems & Pro Series Systems.

Important notes depending on your system:

Enerdrive eSYSTEM / DIY Board:

If you have or are purchasing an inverter up to 3000W with your eSYSTEM / DIY Board, you will need to purchase 2 of these cables (one for battery to board and another one for board to inverter).

Choose 1m (1000mm) or 1.5m (1500mm) depending on how far away you mount the inverter from the board. Tech tip: mount the inverter as close to the board as possible!

If you are not choosing an inverter, you will only need one cable (battery to board).

Enerdrive Pro Series (White Lithium Box):

If you are purchasing the Enerdrive Pro Series (white Lithium Box), you will receive one of these sets cables included in the purchase. Therefore, for an inverter purchase, you will only need to purchase one of these sets of cables.

Enerdrive Anderson 50A Connector to DC to DC Charger Cable Kit 16mm2. 5.5 Meters. Suitable for caravan/trailer DC2DC charger installations. The anderson connector is mounted at the tow hitch and the cable is run to the DC to DC Charger in the trailer/van. To be used in conjunction with ENC-KIT-BATT-AP50-16.

Including:

• 5500mm of 16mm2 TWIN Cable
• 1 x 50A Grey Andersen Plug Connected to one end of cable
• 2 x LUGS supplied loose (16-6mm eyelet)

Enerdrive 16mm Cable Kit (Inc 70A Fuse) Start Battery To 50A Anderson Connector Mounted at the Tow Hitch, 5 Metres. Suitable for vehicle circuit from Start Battery to Anderson plug connector mounted at the tow hitch. Connect to starter battery with 70A fuse close to start battery and run cable to anderson connector at tow hitch. To be used in conjunction with ENC-KIT-AP50-DCDC-16 for DC to DC Charger mounted in caravan/trailer.

Picking up a new caravan or camper trailer equipped with an Enerdrive DC-DC 40A Charger? This cable will need to be installed in your vehicle so that you are ready to connect your start battery to the electrical system in the van.

PRO TIP: You will require a ratchet crimping tool for this cable kit. PLEASE CLICK HERE to find our tool range.

Including:

• 5000mm of 16mm2 TWIN Cable
• 1 x 50A Grey Andersen Plug Connected to one end of cable
• 4 x LUGS supplied loose (16-8mm eyelet)
• 1 x LMI Fuse Holder and 70A Fuse supplied loose

Enerdrive 16mm Cable Kit (Inc 70A Fuse) Start Battery to DC to DC Charger (Vehicle Mounted), 5 Metres. Suitable for vehicle circuit from Start Battery to DC to DC Charger mounted in vehicle. Connect to start battery with a 70A fuse close to start battery. Run cable to DC to DC Charger mounted within vehicle.

PRO TIP: You will require a ratchet crimping tool for this cable kit. PLEASE CLICK HERE to find our tool range.

Including:

• 5000mm of 16mm2 TWIN Cable
• 2 x LUGS Crimped (16-6mm eyelet)
• 4 x LUGS supplied loose (16-8mm eyelet)
• 1 x LMI Fuse Holder and 70A Fuse supplied loose