Enerdrive B-TEC 24V 100Ah Lithium Battery & 30A Industrial Battery Charger Bundle

Specifications

SKU K-100-01

Brand Enerdrive

GTIN 9342616020593

Warranty Period: 5 Years

Product Category Batteries

Battery Voltage 24V

Amp Hours (ah) 100

Battery Weight (kg) 25

Model EPL-100BT-24V (Battery) | EPI-2430 (Battery Charger)

Nominal Voltage 25.6V (Battery)

Nominal Capacity 100Ah (Battery)

Cycle Life (DOD – 80% under controlled conditions) ≥ 2000 Cycles (Battery)

Battery Charge Temperature 0 ̴ 45°C (Battery)

Normal Charge Voltage CV/CC* 28.80 ̴ 29.20V (Battery)

Standby (Float) Voltage 27.00 ̴ 27.60V (Battery)

Maximum Charge Current 50A @ 25°C for 30mins (Battery) | MAX Power 850W, 8.5A @100V – 4.25A @230V (Battery Charger)

Recommended Charge Current for Maximum Life ≤ 33A (Battery)

Battery Discharge Temperature -20 ̴ 60°C (Battery)

Battery Output Voltage Range 22.00 ̴ 29.20V (Battery)

Maximum Discharge Current 100A @ 25°C ± 5°C for 30mins (Battery)

Pulse Discharge Current 450A for 1.0s (Battery)

Discharge Cut-off Voltage ≤ 22.40V (Battery)

Storage Range (temp) -40° to 70° C (Battery Charger)

Dimensions Battery: 485 x 170 x 245 mm | Industrial Charger: 207 x 180 x 160 mm (L x W x H)

AC Input Frequency Range 50-60 Hz (Battery Charger)

Selectable Battery Type AGM, Flooded, GEL (12 Cell, 40Ah Min) (Battery Charger)

Operating Range (temp) -30° to 50° C (Battery Charger)

Net Weight (kg) 29.6

Charger Mode Output Voltage 38V (Battery Charger)

Videos

Enerdrive B-TEC Lithium Batteries - Part 1 - Application

Enerdrive B-TEC Lithium Batteries - Part 2 - Specifications

Enerdrive B-TEC Lithium Batteries - Part 3 - Installation

Enerdrive B-TEC Lithium Batteries - Part 4 - Settings

Enerdrive B-TEC Lithium Batteries - Part 5 - Operation

Enerdrive B-TEC Lithium Batteries - Part 6 - Fault Finding

The Best Caravan Battery?

What Will My Camping Battery Run?

Expanding Your Enerdrive B-TEC Capacity: Enerdrive Batteries in Parallel

How To: Resetting A Flat Enerdrive BTEC or eLITE Battery

Exploring The Enerdrive BMS Found Internally In Their Lithium Batteries

Lithium Batteries Australia - Are they Safe

Customer Reviews

Product Q&A

• Can I connect the Enerdrive B-tec Lithium Batteries in Parallel or in series?

  Hi there,

  You cannot connect any of the EnerdriveB-TEC batteries in series. You can however connect up to two only of the same size (ah) B-TEC batteries in Parallel. Enerdrive recommend that you only do this if you don't over load the max current of the internal BMS board from ONE OF THE BATTERIES.

  Example. If you connect 2 x 200Ah B-TEC batteries then do not draw more than 200A of DC current from that battery bank, as one (1) single 200Ah B-TEC battery is only capable of handling 200A DC.

  The main aim of connecting two (2) of the Enerdrive B-TEC batteries is not to increase your maximum DC current output, but to double your storage capacity.

  Double the storage equals double the time you can stay powered up and off the grid.

  Be sure to always consult the Enerdrive user manuals for correct cable sizing, fuse sizing and wiring diagrams.

  We now sell an Enerdrive battery bundle with a parallel kit - please CLICK HERE to find it.

Warranty

Delivery