Enerdrive 40A DC to DC Battery Charger with Installation Kit

Product Description

Enerdrive 40A DC to DC Battery Charging Installation Kit, includes Circuit Breakers, Lugs and Heavy Duty 16mm ² Twin Core Cable, 5 Year warranty. 

This kit has been designed for in-vehicle installation.

Kit includes: 

• 12V 40A ePOWER DC2DC Battery Charger - 12V 40A, EN3DC40+
• 16mm ² Twin Core Cable 6 Meters
• 16MM – 8mm Diameter Cable Lugs x12 Pieces

• 70 Amp Manual Reset Circuit Breaker x1 Piece

• 60 Amp Manual Reset Circuit Breaker x1 Piece

ePOWER 12V 40A DC2DC Battery Charger:

designed to meet the rugged demands of Australian conditions and delivering multiple source charging for DC systems.

The Enerdrive ePOWER DC2DC Battery Charger is a fully automatic multistage, multi input battery charger with the ability to charge from either an alternator linked to a battery; or via solar power with the in built Maximum Power Point Tracking (MPPT) Solar Controller.

Features:

• Two totally independent DC Inputs for both engine and solar regulation charging one house battery bank output
• DC M6 screw terminals that will allow for large battery cable connection between all sources
• A dedicated Maximum Power Point (MPPT) solar regulator
• The same battery algorithms as included in our AC mains ePOWER battery charger including a specific lithium charging profile
• 40A output up to 40+°C with thermo controlled fan cooling
• Fully programmable LCD display to show which source is charging the battery along with charger status, voltage and amperage
• Temperature sensor included in charger for more accurate battery charging

For In Vehicle & Marine Wiring Diagram, click below:

For Towed Vehicle Wiring Diagram, click below:

70 Amp Manual Reset Circuit Breaker:

Hi-Amp Circuit Breaker. 1/4"" Stainless Steel Studs 25-70amp. Typically used in auxiliary and accessory circuits in truck, bus RV's and marine applications. Others include battery charge and DC audio System.

Features:

• Rated Current: 70Amp
• Dimensions: 86 x 48.4 x 44.2mm
• Interrupt Capacity: 5KA @ 16Vdc | 3KA @ 32Vdc | 2KA @ 72 Dvc
• Voltage: Up to 48Vdc
• Calibration @ 25­°C: 100% Hold 135% Trip (percentage of rating)
• Endurance: 400% A 14Vdc, 5000 cycles